Need a litle help

kjarrime
Newbie

Offline

Posts: 9

« on: January 29, 2010, 04:41:04 PM »

I have got a Clone from ceriatone.

And i have a old crappy speaker who i figured i could try out. and it seem to be 6,8ohm speaker. I just used a multiM to find that out.
My amp can take 4 ohm 8 ohmm and 16 ohmm. so i need to find out what i should use?

Thanks - Kjartan Már Eyþórsson.

-


	Logged

kjarrime
Newbie

Offline

Posts: 9

Re: Need a litle help

« Reply #1 on: January 29, 2010, 04:50:20 PM »

BTW it´s an old guitar speaker from an old amp i had.


	Logged

cmoore
Sr. Member

Offline

Gender: Male

Posts: 351

Re: Need a litle help

« Reply #2 on: January 29, 2010, 10:18:47 PM »

You say your speaker is 6,8
Do you mean 6.8 ?
If so, that means you have a 8 ohm speaker. You should use the 8 ohm selector for your amplifier.


	Logged

wyatt
Guest

Re: Need a litle help

« Reply #3 on: January 30, 2010, 07:10:31 PM »

Quote from: hired hand on January 29, 2010, 10:18:47 PM

You say your speaker is 6,8
Do you mean 6.8 ?
If so, that means you have a 8 ohm speaker. You should use the 8 ohm selector for your amplifier.

+1

The 6.8 ohms is DC resistance, not speaker impedance. Measuring actual impedance is a lot more complicated and requires more equipment, including atone generator.

Generally on a DMM, a 4 ohm speaker will measure around 3.2, a 8 ohm speaker will measure around 6.8 and a 16 ohm speaker will measure around 12.8.


« Last Edit: January 30, 2010, 07:16:26 PM by wyatt »	Logged

kjarrime
Newbie

Offline

Posts: 9

Re: Need a litle help

« Reply #4 on: January 31, 2010, 12:59:15 PM »

Thanks alot.


	Logged

Pages: [1]

« previous next »

	Welcome, Guest. Please login or register. Did you miss your activation email? November 21, 2024, 10:42:24 PM

News: Ceriatone Forums are up and running!!! Guests please register Note: If you want to help you can to keep the forums alive. Do you want to advertise on this forum ? Send me a private message.