Welcome, Guest. Please login or register.
Did you miss your activation email?
November 21, 2024, 10:18:30 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Website, Store
| |-+  Support
| | |-+  Wiring diagram needed		 « previous next »
Pages: [1] Go Down Print
Author Topic: Wiring diagram needed  (Read 7589 times)
GeeDub
Newbie
*
Offline Offline

Posts: 6


View Profile
« on: February 07, 2012, 11:08:28 PM »
Does anyone have a wiring diagram for a ppimv for a jtm45 using a 500k dual pot?

G
Logged
wyatt
Guest
« Reply #1 on: February 08, 2012, 05:20:06 AM »
Just use the LarMar-based one Ceriatone posts with the 500K pot.  Though I think most people prefer the 250K.  Still it doesn't hurt to try.




For a more traditional 500K PPIMV, all I can link is a schematic, but it's so amazing simple you should be able to apply it if you are planning on working in the amp.  (but I still think the LarMar is the way to go).

www.blueguitar.org/new/schem/misc_mod/pi-m-vol.pdf
Logged
GeeDub
Newbie
*
Offline Offline

Posts: 6


View Profile
« Reply #2 on: February 08, 2012, 05:34:34 AM »
Thanks much
Does this diagram look usable?

* 1-35db4c04d1.jpg (45.22 KB, 488x446 - viewed 816 times.)
Logged
GeeDub
Newbie
*
Offline Offline

Posts: 6


View Profile
« Reply #3 on: February 09, 2012, 08:39:51 PM »
I decided to go with the LarMar based ppimv using a 500k dual pot. My only question now is the mv type2 diagram shows 2 - 2.2M resistors mounted to the 250k pot. Using a 500k pot, would the 2.2M value be ok, would I need a different value, would I need any resistors at all?

G
Logged
wyatt
Guest
« Reply #4 on: February 10, 2012, 05:23:23 AM »
Quote from: GeeDub on February 09, 2012, 08:39:51 PM
I decided to go with the LarMar based ppimv using a 500k dual pot. My only question now is the mv type2 diagram shows 2 - 2.2M resistors mounted to the 250k pot. Using a 500k pot, would the 2.2M value be ok, would I need a different value, would I need any resistors at all?

G

Yes, they don't quite correct as much, but you run into other issues if you try and increase them.  If the 500K don't satisfy, you are better off swapping the pot instead of those resistors.
Logged
GeeDub
Newbie
*
Offline Offline

Posts: 6


View Profile
« Reply #5 on: February 10, 2012, 05:41:45 AM »
So, the 2.2m's would be ok to use?
Logged
GeeDub
Newbie
*
Offline Offline

Posts: 6


View Profile
« Reply #6 on: February 12, 2012, 07:05:34 AM »
Anybody?
Logged
GeeDub
Newbie
*
Offline Offline

Posts: 6


View Profile
« Reply #7 on: February 16, 2012, 06:03:37 PM »
At Wyatt's recommendation (thanks again), I installed the LarMar based ppimv using a 250k dual pot. Very easy to install, sounds great. Gives you more tonal variety at a useable level.

G
Logged
wyatt
Guest
« Reply #8 on: February 16, 2012, 06:50:04 PM »
Quote from: GeeDub on February 16, 2012, 06:03:37 PM
At Wyatt's recommendation (thanks again), I installed the LarMar based ppimv using a 250k dual pot. Very easy to install, sounds great. Gives you more tonal variety at a useable level.

G

excellent.  And yes, use 2.2M.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.