Welcome, Guest. Please login or register.
Did you miss your activation email?
November 23, 2024, 08:03:15 AM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  British Style
| |-+  Plexi Lead, Bass, Superlead
| | |-+  Plexi50 1986 bass		 « previous next »
Pages: [1] Go Down Print
Author Topic: Plexi50 1986 bass  (Read 6799 times)
Roffe
Newbie
*
Offline Offline

Posts: 11


View Profile
« on: September 10, 2012, 03:50:46 PM »
Hi there I just got a ultimate attenuator for my plexi 50. I cranked both channels, and the ht fuse blew. I` m guessing it needs new power amp tubes. Anyway: I had a gig with my band the next day, so I used a 1 amp fuse from my deluxe reverb and managed to do the gig. Now I need new fuses, and I`m planning to buy a few. I see on the marshallamps page that you can buy 32mm and 20mm fusees. What is the correct size for ht and mains fuses. The amp is a 230v amp.
Thanks,
Roffe
Logged
wyatt
Guest
« Reply #1 on: September 11, 2012, 04:29:19 PM »
I can't answer definitely, I don't own a Ceraitone Plexi...the 32mm is the traditional 1-1/4" fuses that were standard for decades and decades. Most smaller amp makers still use 1-1/4" fuse holders, repros of old Fender and Marshall holders; where as the modern large-scale operations are moving to smaller fuses that can use PCB-mounted fuse holders. But it can be confusing...Fender uses a 32mm fuse holder for it's North American DRRI, but the export now gets a 20mm fuse holder.

The visual/physical difference between the two is one that you will never confuse once you see both, the 20mm is signficantly smaller, not just in length but in diameter as well. But it's easy to measure the length and know for sure.

So, my answer is totally useless except to say...use a ruler.
« Last Edit: September 11, 2012, 04:39:16 PM by wyatt » Logged
Frugal Amps
Newbie
*
Offline Offline

Posts: 3


View Profile
« Reply #2 on: September 13, 2012, 11:44:29 PM »
Based on the layout and chassis pictures I have seen, you most likely need the longer style fuse.  But just why did the fuse blow in the first place?  By using the higher wattage fuse from the DR, you risk damage to the amp.  I would explore that avenue unless you know why it went in the first place.
Logged
panuponkz
Newbie
*
Offline Offline

Posts: 2


View Profile
« Reply #3 on: August 29, 2016, 12:14:52 PM »
Plexi50 1986 bass
Logged
คาสิโน มือถือ
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.