Welcome, Guest. Please login or register.
Did you miss your activation email?
December 25, 2024, 01:44:18 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.



Amplified Parts
+  Ceriatone Forum
|-+  Ceriatone
| |-+  Overtone
| | |-+  volume difference
« previous next »
Pages: [1] Go Down Print
Author Topic: volume difference  (Read 5650 times)
mkstylee
Newbie
*
Offline Offline

Posts: 11



View Profile
« on: July 12, 2011, 08:27:54 PM »

hi guys ,on my OTS there's a lot of volume difference between the OD channel and the clean channel ,even if the clean volume and the OD level are set the same ,and to balance them up the clean has to be on say 2 o'clock and 9 o'clock on the OD channel is this normal??? i know there will be some differance but the unity gap seems quite wide.
Logged

ceriatone 50w OTS
cornford RH30
Phaez dumble clone
1979 musicman RP65
5 watt EVA shg with matching 2x12 in red
marshall jmd1
marshall tsl60
2x marshall 1960 4x12 cabs
8 strats
4 teles
2 les paul
1 sg
1 335
1 suhr
1 bm red special
too much other junk to mention
T Wilcox
Sr. Member
****
Offline Offline

Gender: Male
Posts: 399



View Profile
« Reply #1 on: July 12, 2011, 08:53:07 PM »

Which model do you have again?
If its non HRM that is what the ratio knob is for.
The volume ratio between clean and OD Wink
between 12 and 3 oclock is where I set my volume knob and then with footpedal switch back and forth while using ratio to make both equal.

Todd
« Last Edit: July 12, 2011, 08:56:13 PM by T Wilcox » Logged

Plexi bass 1986 ( build #6 )
Ceriatone Ultra Champ ( build #5 )
TW Express clone ( build #4 )
Ceriatone HRM MK2 ( build #3 )
Ceriatone 2550  ( Build #2 )
Ceriatone OTS FM50 Modern Eagle Mod (Build #1)
EBMM Steve Morse original
50th anniv American Strat
mkstylee
Newbie
*
Offline Offline

Posts: 11



View Profile
« Reply #2 on: July 13, 2011, 09:52:38 PM »

hi it's a non HRM OTS 50w, all standard apart from the valves ,i thought the ratio was like the gain and the level was the uh !level of the drive please give me more info guys ,does the ratio adjust between the od and clean ,,sorry if you all know this stuff but we all gotta learn ,and mine didnt have a manual with it.
Logged

ceriatone 50w OTS
cornford RH30
Phaez dumble clone
1979 musicman RP65
5 watt EVA shg with matching 2x12 in red
marshall jmd1
marshall tsl60
2x marshall 1960 4x12 cabs
8 strats
4 teles
2 les paul
1 sg
1 335
1 suhr
1 bm red special
too much other junk to mention
Kevster
Jr. Member
**
Offline Offline

Posts: 90


View Profile
« Reply #3 on: July 13, 2011, 09:58:24 PM »

The basic manuals are available on the Ceriatone website....
Logged
T Wilcox
Sr. Member
****
Offline Offline

Gender: Male
Posts: 399



View Profile
« Reply #4 on: July 14, 2011, 02:55:52 AM »

hi it's a non HRM OTS 50w, all standard apart from the valves ,i thought the ratio was like the gain and the level was the uh !level of the drive please give me more info guys ,does the ratio adjust between the od and clean ,,sorry if you all know this stuff but we all gotta learn ,and mine didnt have a manual with it.

Ratio is pretty much OD volume as compared to Clean it does not affect gain, level is more like your gain/OD level.
Use it to match your OD with your clean and that's it.

Todd
Logged

Plexi bass 1986 ( build #6 )
Ceriatone Ultra Champ ( build #5 )
TW Express clone ( build #4 )
Ceriatone HRM MK2 ( build #3 )
Ceriatone 2550  ( Build #2 )
Ceriatone OTS FM50 Modern Eagle Mod (Build #1)
EBMM Steve Morse original
50th anniv American Strat
boldaslove6789
Sr. Member
****
Offline Offline

Gender: Male
Posts: 310


I'm never too loud, HAHAHA


View Profile WWW
« Reply #5 on: July 14, 2011, 04:06:15 AM »

If you aren't using a Dumbleator you'll want to turn the Ratio control up to about 1:00. Ratio is only a Ratio between the Clean and Overdrive, the Master will control both the Clean and Overdrive's overall Volume on a NON-HRM.


Try these settings:

   Preamp "Volume" (1st control to the left): 1:00

  "T" "M" "B" controls to taste

   OD "Level": 11:00
 
   OD "Ratio": 1:00

 The Overdrive controls should look like this: \  /

   Master: (Set to the volume you wish) Try 8:00 - 9:00

  "Presence" to taste

______________________________

If using a D-lator try these settings (same settings above with the Overdrive controls):

"Master" (On Amp): 11:00

D-lator Settings:

 "Send" 12:00
 
 "Return" 12:00

 and the last control will now become your overall Master Volume.


 
« Last Edit: July 14, 2011, 04:09:35 AM by boldaslove6789 » Logged

-Greg D. Clark

Stop searching for tone, INVENT IT!

http://www.funkymunkpedals.com/
Pedals That Speak!

 http://www.youtube.com/GDClarkProject
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.