Welcome, Guest. Please login or register.
Did you miss your activation email?
November 25, 2024, 12:07:50 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Ceriatone
| |-+  Overtone
| | |-+  straight into the amp sounds different from through pedalboard.		 « previous next »
Pages: [1] Go Down Print
Author Topic: straight into the amp sounds different from through pedalboard.  (Read 4797 times)
Steven_nl
Sr. Member
****
Offline Offline

Gender: Male
Posts: 473



View Profile WWW
« on: March 23, 2009, 11:01:16 AM »
I have a pedalboard with in the right order:
Korg Pitchblack tuner
Cry Baby 535Q
EMMA discumbobulator
Keeley TS9
Wampler Ecstacy Drive
I use GeorgeL patch cables
I use a Pedal Snake cable for the guitar signal from the board to the amp, the 9V adapter power, Midi and a leslie on/off switch.

As expected there's a difference in sound when I run my guitar directly into amp from the sound when I use my board.
Hard to describe the difference. It seems there's a bit more dynamics in the (OD) sound and the character of the guitar is a bit more detailed. With the pedal board the sound is a bit less direct and maybe a bit less harsh. Probably a high cut.

What could I do to optimize my board setup?

Second question. I use a fairly high grade adapter to power the effects on the board and to power the Kleinulator. This seems to prduce a nasty hum. Strangely enough I think this wasn't the case before. I have my PC running in the same room as my amp. Could it be a net problem? RFI/EMI?  Should I get a Furman? better power chord?

Thanks for your help guys :-)
« Last Edit: March 23, 2009, 12:23:56 PM by Steven_nl » Logged
bluesfendermanblues
Sr. Member
****
Offline Offline

Gender: Male
Posts: 452



View Profile
« Reply #1 on: March 23, 2009, 11:33:33 AM »
Quote from: Steven_nl on March 23, 2009, 11:01:16 AM
I have a pedalboard with in the right order:
Korg Pitchblack tuner
Cry Baby 535Q
EMMA discumbobulator
Keeley TS9
Wampler Ecstacy Drive
I use GeorgeL patch cables
I use a Pedal Snake cable for the guitar signal from the board to the amp, the 9V adapter power, Midi and a leslie on/off switch.

As expected there's a difference in sound when I run my guitar directly into amp from the sound when I use my board.
Hard to describe the difference. It seems there's a bit more dynamics in the (OD) sound and the character of the guitar is a bit more detailed. With the pedal board the sound is a bit less direct and maybe a bit less harsh. Probably a high cut.

What could I do to optimize my board setup?

Second question. I use a fairly high grade adapter to power the effects on the board and to power the Kleinulator. This seems to prduce a nasty hum. Strangely enough I think this wasn't the case before. I have my PC running in the same room as my amp. Could it be a net problem? RFI/EMI?  Should I get a Furman? better power chord?

Thanks for your help guys :-)










In my setup there's a difference in tone. As far as I know all my pedals are true bypass but still. How do you guys handle this?

cheers
Steven

1. question "What could I do to optimize my board setup?"
Try to plugin to your effects without your 'Cry Baby 535Q'. Wahs are notoriously known for loading your sound down, due to low input impedance of these units.
If your sound i brighter without the wah. You can
a) Install a true bypass switch in your wah pedal OR
b) use a line driving pedal in front of the wah. This could be any boss pedal. And since you don't have a compressor on your pedal board, yet, you could buy any boss compresser (the CS3 is nice) and 'high cut of tone' problem should be eliminated, wheater you use the Boss compressor (or similar) in 'on' or 'off' mode.

2. Hum question
I assume that you use the Kleinulator in the Overtone effects loop. And your pedals in front the the amp (instrument) input.

Use a seperate supply for your Kleinulator.

If this doesn't solve the humming, you probably have a ground loop on your pedal board. Use a 9v chord form your psu, without ground connetion. You can buy one in every music store. My T-REX junior supply has one included from the get go.

A furmann should not be necessary.
 
« Last Edit: March 23, 2009, 11:41:27 AM by bluesfendermanblues » Logged
Respect for the big guy's work....we're at this part of the forum because of HAD's amps.
Steven_nl
Sr. Member
****
Offline Offline

Gender: Male
Posts: 473



View Profile WWW
« Reply #2 on: March 23, 2009, 12:25:09 PM »
thanks for your help

as far as I know this version (new) of the Cry Baby is true Bypass. Could I use a buffer pedal??
Logged
bluesfendermanblues
Sr. Member
****
Offline Offline

Gender: Male
Posts: 452



View Profile
« Reply #3 on: March 23, 2009, 12:36:12 PM »
Well...give it a try without the wah a see if the highs come back..
Logged
Respect for the big guy's work....we're at this part of the forum because of HAD's amps.
BustedWah
Newbie
*
Offline Offline

Posts: 40


View Profile
« Reply #4 on: March 24, 2009, 05:58:17 AM »
Yeah definitely try without the wah (or without each pedal one by one). I've had a true bypass wah suck some pretty decent tone before. On my old amp, I actually liked it for a while because it smoothed out my shitty tone! Smiley
Logged
Mitch
Guest
« Reply #5 on: April 01, 2009, 03:16:05 AM »
I had the same issues with my OTS- keep your cables as short as possible- avoid long runs in the loop for the Kleinulator (if you have one).  Loading from capacitance in your cables is an issue with the OTS- it's very sensitive to this- you may also try a buffer/line driver of some kind (Barge Concepts make some pretty good ones) - probably with it first in your effects chain - that may solve the issue.

With the hum issue- ensure it's a regulated 9v adaptor- often voltages will drop causing bad hum if you power a lot of pedals as you do- you'll also need it to produce a minimum of around 1.5 amps to power all your stuff- I highly recommend the Powerstation by GigRig- that'll power half the street as well if you need it!  Grin
« Last Edit: April 01, 2009, 03:19:55 AM by Mitch » Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.