Welcome, Guest. Please login or register.
Did you miss your activation email?
November 21, 2024, 05:19:48 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Ceriatone
| |-+  Overtone
| | |-+  Treble not working		 « previous next »
Pages: [1] Go Down Print
Author Topic: Treble not working  (Read 7676 times)
toffeeguitar
Newbie
*
Offline Offline

Posts: 7


View Profile
« on: November 21, 2011, 11:46:18 AM »
Hi Guys,

I'm not an amp expert or an electrician, I just know good tone... hence why I bought a HRM OTS 50 combo.

For some reason the treble knob when turned is not affecting the sound at all, and the amp itself is sounding very muddy, I therefore believe there is no treble in the EQ currently. The only way i can get a treble sound is by pulling out the bright knob.

Am I going to have to take this apart? Have any of you had a similar experience? Was it easy to resolve? Or have I just flipped a switch I shouldn't have?!

Many thanks,

Joe
Logged
SoundPerf
Sr. Member
****
Offline Offline

Gender: Male
Posts: 392



View Profile
« Reply #1 on: November 21, 2011, 09:17:23 PM »
The first thing that comes to mind is that you have the PAB engaged which will take the tone stack out of the equataion. Do you have a footswich connected? if not, how is the switches on the back panel set?
Logged
Chris

Ceriatone HRM 50
w/self built Dumblelator
Avatar 2X12 w/WGS ET-65 & Veteran 30
TC Electronic 2290
2001 PRS McCarty
2010 PRS 513 Swamp Ash
Tacoma JK50C
Seagull S12+
Nairbr
Full Member
***
Offline Offline

Gender: Male
Posts: 142



View Profile
« Reply #2 on: November 22, 2011, 12:27:09 AM »
Quote from: SoundPerf on November 21, 2011, 09:17:23 PM
The first thing that comes to mind is that you have the PAB engaged which will take the tone stack out of the equataion. Do you have a footswich connected? if not, how is the switches on the back panel set?

That would be my guess too.
If I dont have the footswitch connected the PAB switch is opposite to what you think it should be
Logged
Ceriatone 50 watt HRM + C-Lator
Ceriatone Stray Cat 30
Marshall 4 x 12 cab WGS ET-65's
Fender Custom Shop Rory Gallagher Strat
Fender Custom Shop "Kosmic Music 40th Anniversary" Ash Strat
Gibson Custom Shop Les Paul R9 VOS
Gibson Les Paul Traditional Plus with WCR Darkbursts
plasticvonaband
Hero Member
*****
Offline Offline

Gender: Male
Posts: 747


Pickin and Grinnin since 1989


View Profile WWW
« Reply #3 on: November 22, 2011, 03:07:55 AM »
I third that. That is the first thing that popped into my mind
Logged
Overdrive is like peanut butter. Some like it crunchy, some like it creamy.
Bluesmaster 50 2x12 combo and some guitars.
toffeeguitar
Newbie
*
Offline Offline

Posts: 7


View Profile
« Reply #4 on: November 24, 2011, 11:20:48 AM »
Hi Guys,

Thanks for the responses, I will double check its all plugged in properly tonight, but i've been using the footswitch and PAB, so i dont think its that...

Cheers
Logged
T Wilcox
Sr. Member
****
Offline Offline

Gender: Male
Posts: 399



View Profile
« Reply #5 on: November 24, 2011, 04:49:46 PM »
Quote from: toffeeguitar on November 24, 2011, 11:20:48 AM
Hi Guys,

Thanks for the responses, I will double check its all plugged in properly tonight, but i've been using the footswitch and PAB, so i dont think its that...

Cheers

 The treble has no effect when you use the PAB. PAB bypasses the tone stack so neither treble, bass or mid pot will work with it engaged. If you have OD switched on the tone stack ( HRM ) knobs are located inside the amp on a circuit board!.

Todd
Logged
Plexi bass 1986 ( build #6 )
Ceriatone Ultra Champ ( build #5 )
TW Express clone ( build #4 )
Ceriatone HRM MK2 ( build #3 )
Ceriatone 2550  ( Build #2 )
Ceriatone OTS FM50 Modern Eagle Mod (Build #1)
EBMM Steve Morse original
50th anniv American Strat
plasticvonaband
Hero Member
*****
Offline Offline

Gender: Male
Posts: 747


Pickin and Grinnin since 1989


View Profile WWW
« Reply #6 on: November 25, 2011, 03:08:20 AM »
Quote from: T Wilcox on November 24, 2011, 04:49:46 PM
Quote from: toffeeguitar on November 24, 2011, 11:20:48 AM
Hi Guys,

Thanks for the responses, I will double check its all plugged in properly tonight, but i've been using the footswitch and PAB, so i dont think its that...

Cheers

 The treble has no effect when you use the PAB. PAB bypasses the tone stack so neither treble, bass or mid pot will work with it engaged. If you have OD switched on the tone stack ( HRM ) knobs are located inside the amp on a circuit board!.

Todd

True, and if you are going thru both tonestacks (PAB not engaged) it can be kinda muddy.
Logged
Overdrive is like peanut butter. Some like it crunchy, some like it creamy.
Bluesmaster 50 2x12 combo and some guitars.
SoundPerf
Sr. Member
****
Offline Offline

Gender: Male
Posts: 392



View Profile
« Reply #7 on: November 25, 2011, 04:59:32 AM »
Also, was this built as a kit or by Ceriatone? Has anyone owned it previously or could've messed with the internal TMB trimmers? 
Logged
Chris

Ceriatone HRM 50
w/self built Dumblelator
Avatar 2X12 w/WGS ET-65 & Veteran 30
TC Electronic 2290
2001 PRS McCarty
2010 PRS 513 Swamp Ash
Tacoma JK50C
Seagull S12+
toffeeguitar
Newbie
*
Offline Offline

Posts: 7


View Profile
« Reply #8 on: November 25, 2011, 05:30:08 PM »
Hi all,

Right, the PAB switch is set to 'pedal' and the PAB boost is definitely off on the pedal but i'm still having the same issue. The bass and middle adjusts fine, but there is no treble.

I'ts a Ceriatone in house build delivered only 2 months ago. 50 HRM version.

It's going to involve a screwdriver this isn't it?!  Huh?

Cheers
Logged
SoundPerf
Sr. Member
****
Offline Offline

Gender: Male
Posts: 392



View Profile
« Reply #9 on: November 26, 2011, 04:52:01 AM »
Quote from: toffeeguitar on November 25, 2011, 05:30:08 PM
Hi all,

Right, the PAB switch is set to 'pedal' and the PAB boost is definitely off on the pedal but i'm still having the same issue. The bass and middle adjusts fine, but there is no treble.

I'ts a Ceriatone in house build delivered only 2 months ago. 50 HRM version.

It's going to involve a screwdriver this isn't it?!  Huh?

Cheers


Yes, it does seem that something is wrong. If you have no electronic or amp experience I'm thinking taking it to a tech is in order. If it's only 2 months old it should be under warranty. Have you contacted Nik yet?

Do you have any soldering skills? If so, you could start by reflowing the connections around the treble pot and connections associated with it. Also just take a look around for any glaring soldering issues. Download the layout from the Ceriatone site and trace the circuit based on the layout.
Logged
Chris

Ceriatone HRM 50
w/self built Dumblelator
Avatar 2X12 w/WGS ET-65 & Veteran 30
TC Electronic 2290
2001 PRS McCarty
2010 PRS 513 Swamp Ash
Tacoma JK50C
Seagull S12+
toffeeguitar
Newbie
*
Offline Offline

Posts: 7


View Profile
« Reply #10 on: November 26, 2011, 07:37:07 AM »
Cheers, will contact Nik. I'm no expert with anything like that, however my Dad's pretty good with this sort of thing, I'll take it and the circuit diagrams down to him next weekend.

Thanks for your help everyone.

Joe
Logged
sduck
Full Member
***
Offline Offline

Gender: Male
Posts: 173



View Profile
« Reply #11 on: November 28, 2011, 04:20:52 AM »
Before your dad messes with it make sure he knows about the safety issues - discharging capacitors, the 400v's coming from the transformers if you forget and leave it plugged in, etc. Working on amps isn't the same as fixing a radio or something.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.