Strange overdrive with vvr

deltacomet
Newbie

Offline

Posts: 9

« on: February 09, 2012, 03:04:05 AM »

I installed a vvr in my ots. All work , good sound in clean. But when in put overdrive on, Isn't the same sound before vvr. I put level and ratio to 10 and my clean channel is louder than overdrive.

How can i have the overdrive back again ?

Put vvr only in my power tube and install ppimv ?

May, i have did something wrong ?

Thanks
Gui


	Logged

sduck
Full Member

Offline

Gender: Male

Posts: 173

Re: Strange overdrive with vvr

« Reply #1 on: February 09, 2012, 03:44:02 AM »

Based on my very limited reading on this I think you'd want it on the power section instead of V1 on these amps.

http://damacleod.wordpress.com/2010/03/12/installing-variable-voltage-regulator-vvr-in-a-valve-amp/


	Logged

plasticvonaband
Hero Member

Offline

Gender: Male

Posts: 747

Pickin and Grinnin since 1989

Re: Strange overdrive with vvr

« Reply #2 on: February 09, 2012, 07:52:29 AM »

Quote from: sduck on February 09, 2012, 03:44:02 AM

+1 on that. The voltages on the preamp section are very important on these D Style amps. I did alot of experimenting with voltages via my sag simulator and found that lowering the voltages on V1 and V2 had a dramatic effect on tone and gain, not just OD but overall gain


	Logged

Overdrive is like peanut butter. Some like it crunchy, some like it creamy.
Bluesmaster 50 2x12 combo and some guitars.

deltacomet
Newbie

Offline

Posts: 9

Re: Strange overdrive with vvr

« Reply #3 on: February 09, 2012, 06:08:26 PM »

Thanks for information. All I have to do is put the vvr on the power section and make a ppimv ? or the ots already have ppimv ?


	Logged

Pages: [1]

« previous next »

	Welcome, Guest. Please login or register. Did you miss your activation email? November 24, 2024, 05:10:11 PM

News: Ceriatone Forums are up and running!!! Guests please register Note: If you want to help you can to keep the forums alive. Do you want to advertise on this forum ? Send me a private message.