Quinn 183 pre with Mill Creek/Ceriatone BM PWR amp

plasticvonaband
Hero Member

Offline

Gender: Male

Posts: 747

Pickin and Grinnin since 1989

Re: Quinn 183 pre with Mill Creek/Ceriatone BM PWR amp

« Reply #15 on: March 23, 2011, 08:22:31 AM »

Cool. I figured it had to be simpler than what i was thinking. I figured you were going from the preamp out from the quinn and then into the power amp in on the BM, just didn't know where the dlator went in

. Sounds great, and thanks for the info!


	Logged

Overdrive is like peanut butter. Some like it crunchy, some like it creamy.
Bluesmaster 50 2x12 combo and some guitars.

johanare
Newbie

Offline

Posts: 20

Re: Quinn 183 pre with Mill Creek/Ceriatone BM PWR amp

« Reply #16 on: March 24, 2011, 06:45:02 AM »

Quote

Quote from: SoundPerf on March 18, 2011, 11:16:25 AM

Is the RG400 cable any special brand?

Nah, just look for MIL-DTL-17 spec'd (make sure the conductor is stranded) coaxial cable like this:

http://www.aircraftspruce.com/catalog/elpages/coaxialcableconnectors3.php

Quote from: bluesfendermanblues on March 18, 2011, 04:10:09 PM

Are those RG400 cables at 270pf per cable or in total

Yes they're 270 pF per side (send & return from D-lator)

Hi
Need some "patch" cables between my Ojai-type of amp and the D-Lator. Using the DLator w long cables or no DLator is a HUGE difference soundwise. I need some new cables since I use some high quality but very long guitar cables at the moment.
I see mention of 270pF total for each cable going to and from the amp. The cables specs are about 80-90pF/meter (30pF/ft). Does this mean your cables each are about 3 meters long?


« Last Edit: March 24, 2011, 08:13:07 PM by johanare »	Logged

boldaslove6789
Sr. Member

Offline

Gender: Male

Posts: 310

I'm never too loud, HAHAHA

Re: Quinn 183 pre with Mill Creek/Ceriatone BM PWR amp

« Reply #17 on: March 24, 2011, 02:54:08 PM »

Both of the cables are 270 pF individualy, not the total of the two.


	Logged

-Greg D. Clark

Stop searching for tone, INVENT IT!

http://www.funkymunkpedals.com/
Pedals That Speak!

http://www.youtube.com/GDClarkProject

rane008
Full Member

Offline

Posts: 122

Re: Quinn 183 pre with Mill Creek/Ceriatone BM PWR amp

« Reply #18 on: March 24, 2011, 04:08:11 PM »

Quote from: johanare on March 24, 2011, 06:45:02 AM

Quote

Quote from: SoundPerf on March 18, 2011, 11:16:25 AM

Is the RG400 cable any special brand?

Nah, just look for MIL-DTL-17 spec'd (make sure the conductor is stranded) coaxial cable like this:

http://www.aircraftspruce.com/catalog/elpages/coaxialcableconnectors3.php

Quote from: bluesfendermanblues on March 18, 2011, 04:10:09 PM

Are those RG400 cables at 270pf per cable or in total

Yes they're 270 pF per side (send & return from D-lator)

Hi
Need some "patch" cables between my Ojai-type of amp and the D-Lator. Using the DLator w long cables or no DLator is HUGE. I need some new cables since I use some high quality but very long guitar cables at the moment.
I see mention of 270pF total for each cable going to and from the amp. The cables specs are about 80-90pF/meter (30pF/ft). Does this mean your cables each are about 3 meters long?

One way to go is get some George L cable and connectors (Lava also make some). No soldering required and you can cut them to the length you need. I run these between my C-lator and amp which are in the same head cab.


	Logged

johanare
Newbie

Offline

Posts: 20

Re: Quinn 183 pre with Mill Creek/Ceriatone BM PWR amp

« Reply #19 on: March 24, 2011, 08:15:29 PM »

Quote from: boldaslove6789 on March 24, 2011, 02:54:08 PM

Both of the cables are 270 pF individualy, not the total of the two.

YES, total of 270pF for each cable. Have you measured? RG400 cables is about 80-90pF/meter (30pF/ft). Does this mean your cables are 3 meters (about 10feet) long?


	Logged

boldaslove6789
Sr. Member

Offline

Gender: Male

Posts: 310

I'm never too loud, HAHAHA

Re: Quinn 183 pre with Mill Creek/Ceriatone BM PWR amp

« Reply #20 on: March 25, 2011, 07:17:04 AM »

Quote from: johanare on March 24, 2011, 08:15:29 PM

YES, total of 270pF for each cable. Have you measured? RG400 cables is about 80-90pF/meter (30pF/ft). Does this mean your cables are 3 meters (about 10feet) long?

Yes I measured, they're approx.10ft. You have to measure them with a pF meter for them to be accurate although, not just by length.


	Logged

-Greg D. Clark

Stop searching for tone, INVENT IT!

http://www.funkymunkpedals.com/
Pedals That Speak!

http://www.youtube.com/GDClarkProject

johanare
Newbie

Offline

Posts: 20

Re: Quinn 183 pre with Mill Creek/Ceriatone BM PWR amp

« Reply #21 on: March 25, 2011, 12:09:55 PM »

Oh, I'll go home and see what the cables I use now measure.
I guess the jacks give some capacitance too.


	Logged

MacTone12ax7
Newbie

Offline

Posts: 4

Re: Quinn 183 pre with Mill Creek/Ceriatone BM PWR amp

« Reply #22 on: May 05, 2011, 11:47:35 PM »

I have just completed the same setup using a G-Sharp from TC Electronic and a C-Lator into an OTS50 - concern about the hiss coming from the G-Sharp, have you experienced same thing?

Thanks


	Logged

boldaslove6789
Sr. Member

Offline

Gender: Male

Posts: 310

I'm never too loud, HAHAHA

Re: Quinn 183 pre with Mill Creek/Ceriatone BM PWR amp

« Reply #23 on: May 06, 2011, 08:24:05 PM »

What is your rig in detail?

Are you using a power conditioner with all grounded plugs?

My D-lator does not have a grounded plug BTW.


	Logged

-Greg D. Clark

Stop searching for tone, INVENT IT!

http://www.funkymunkpedals.com/
Pedals That Speak!

http://www.youtube.com/GDClarkProject

Pages: 1 [2]

« previous next »

	Welcome, Guest. Please login or register. Did you miss your activation email? December 26, 2024, 12:51:30 AM

News: Ceriatone Forums are up and running!!! Guests please register Note: If you want to help you can to keep the forums alive. Do you want to advertise on this forum ? Send me a private message.