Welcome, Guest. Please login or register.
Did you miss your activation email?
November 22, 2024, 07:43:10 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Ceriatone
| |-+  Overtone
| | |-+  OTS Parts received		 « previous next »
Pages: [1] Go Down Print
Author Topic: OTS Parts received  (Read 7975 times)
djroge1
Jr. Member
**
Offline Offline

Posts: 80


View Profile
« on: May 20, 2009, 04:33:51 AM »
I just received the OTS kit 2.

EDIT: If you happened to have read what I first posted please disregard.

So many parts... where to begin?

Thanks
« Last Edit: May 20, 2009, 04:53:25 AM by djroge1 » Logged
mcinku
Administrator
Hero Member
*****
Offline Offline

Gender: Male
Posts: 1084



View Profile WWW
« Reply #1 on: May 20, 2009, 08:59:59 AM »
Some words of wisdom from Nik him self...  Wink

1) Mount all hardware first, except trannies
2) Then do heaters
3) Then work on the hardware - pots, switches etc. You will need to do up the jacks from outside of amp and then install perhaps
4) Put in the boards. You can do the small ones first, and wire it up perhaps. Dont put the PS and Main boards yet
5) Put in the OT and choke cause these sit under boards
6) wire it all up, boards included.
7) Put in the PT and do final wiring
Logged
My website

TW Express build
BM HRM build
Prinzetone build
erwin_ve
Guest
« Reply #2 on: May 20, 2009, 09:53:44 AM »
Quote from: mcinku on May 20, 2009, 08:59:59 AM
Some words of wisdom from Nik him self...  Wink

1) Mount all hardware first, except trannies
2) Then do heaters
3) Then work on the hardware - pots, switches etc. You will need to do up the jacks from outside of amp and then install perhaps
4) Put in the boards. You can do the small ones first, and wire it up perhaps. Dont put the PS and Main boards yet
5) Put in the OT and choke cause these sit under boards
6) wire it all up, boards included.
7) Put in the PT and do final wiring


Maybe it's wise to do the heater wiring in a later stage; when installing them in the beginneing it's difficult to get them floating above the tube sockets(like Fender and dumble did...)
Logged
hywelg
Hero Member
*****
Offline Offline

Posts: 896


View Profile
« Reply #3 on: May 20, 2009, 10:25:08 AM »
I did mine slightly differently. I installed the tranformers just before doing the heater wires. This raised it off the bench a little and made it easier to work on as it was very stable. Wired the PT first then the heaters, leaving the OT till very near the end.
Logged
mcinku
Administrator
Hero Member
*****
Offline Offline

Gender: Male
Posts: 1084



View Profile WWW
« Reply #4 on: May 20, 2009, 10:27:32 AM »
Quote from: erwin_ve on May 20, 2009, 09:53:44 AM
Maybe it's wise to do the heater wiring in a later stage; when installing them in the beginneing it's difficult to get them floating above the tube sockets(like Fender and dumble did...)

You right, it depends how you do it.
I'm just starting a bluesmaster HRM kit and I was thinking a while how am I going to do the heaters. At the end I decided to go with the "Marshall" way,... and I have three reasons...
1. If it's ugly you can't see it   Grin
2. The access to sockets it's much easier (for measuring, maintaining...)
3. I have it in my OTS (build by Nik) and that amp sounds good as hell  Cool (even TWs has it done that way and we all know how TWs are touchy about the wiring)
Logged
My website

TW Express build
BM HRM build
Prinzetone build
erwin_ve
Guest
« Reply #5 on: May 20, 2009, 10:34:27 AM »
Mcinku; no3: you're right; but you have to make sure that nothing is within a inch distance of the heater wires(Like in TW's). It otherwise will destroy your sound.
Logged
mcinku
Administrator
Hero Member
*****
Offline Offline

Gender: Male
Posts: 1084



View Profile WWW
« Reply #6 on: May 20, 2009, 11:51:47 AM »
Quote from: erwin_ve on May 20, 2009, 10:34:27 AM
Mcinku; no3: you're right; but you have to make sure that nothing is within a inch distance of the heater wires(Like in TW's). It otherwise will destroy your sound.

I agree but I also think one inch is a little to much... at least I don't have that clearance in my OTS and it sounds good to me
Logged
My website

TW Express build
BM HRM build
Prinzetone build
djroge1
Jr. Member
**
Offline Offline

Posts: 80


View Profile
« Reply #7 on: May 20, 2009, 09:11:05 PM »
Quote from: mcinku on May 20, 2009, 08:59:59 AM
Some words of wisdom from Nik him self...  Wink

1) Mount all hardware first, except trannies
2) Then do heaters
3) Then work on the hardware - pots, switches etc. You will need to do up the jacks from outside of amp and then install perhaps
4) Put in the boards. You can do the small ones first, and wire it up perhaps. Dont put the PS and Main boards yet
5) Put in the OT and choke cause these sit under boards
6) wire it all up, boards included.
7) Put in the PT and do final wiring


Thanks. Sounds simple enough I should have this done in a couple of hours.

I'm joking!! Really, thank you.
Logged
pine
Jr. Member
**
Offline Offline

Posts: 53


View Profile
« Reply #8 on: May 21, 2009, 12:32:27 AM »
You might want to take a look at how this guy wires his controls, it seems like it would be about 10X easier this way; he makes this jig out of wood by tracing the chassis front panel

http://www.soundgaragetales.com/amp-building/front-control-wiring-session
« Last Edit: May 21, 2009, 12:36:32 AM by pine » Logged
nickm57
Jr. Member
**
Offline Offline

Posts: 66


View Profile
« Reply #9 on: May 21, 2009, 11:02:10 AM »
^
just place the pots switches upside down on the front of the chassis for this.


 
Logged
pine
Jr. Member
**
Offline Offline

Posts: 53


View Profile
« Reply #10 on: May 21, 2009, 11:56:19 AM »
Quote from: nickm57 on May 21, 2009, 11:02:10 AM
^
just place the pots switches upside down on the front of the chassis for this.


 

That's even better, why didn't I think of that?
Logged
mcinku
Administrator
Hero Member
*****
Offline Offline

Gender: Male
Posts: 1084



View Profile WWW
« Reply #11 on: May 22, 2009, 06:21:34 AM »
I'm starting a thread about my BM HRM build...
...it might be helpful to check it out.

http://ceriatoneforum.com/index.php?topic=1160.0
Logged
My website

TW Express build
BM HRM build
Prinzetone build
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.