OTS FM50 kit in transit

T Wilcox
Sr. Member

Offline

Gender: Male

Posts: 399

OTS FM50 kit in transit

« on: February 25, 2011, 05:25:57 PM »

Hello all long time lurker here finally pulled the trigger and ordered an OTS FM50 pack 2 kit.
I am in the process of gathering all the tools that I will need.
Do any builders here know what size nut drivers I will need for the various component mounting?
Thank you in advance for any replies.

Todd


	Logged

Plexi bass 1986 ( build #6 )
Ceriatone Ultra Champ ( build #5 )
TW Express clone ( build #4 )
Ceriatone HRM MK2 ( build #3 )
Ceriatone 2550 ( Build #2 )
Ceriatone OTS FM50 Modern Eagle Mod (Build #1)
EBMM Steve Morse original
50th anniv American Strat

SoundPerf
Sr. Member

Offline

Gender: Male

Posts: 392

Re: OTS FM50 kit in transit

« Reply #1 on: February 25, 2011, 08:46:52 PM »

Congrats!
I just received my HRM 50 about a week ago. Been building steadily. But my time is somewhat limited and I also want to take my time since this is my first amp build. So far everything is going well.

The main screws and nuts are M3x12 & M3X6 w/M3 nuts and star washers. These are small and can be a little hard to deal with in some areas. A nut driver for these would be helpful. Then there are connections for the pots, jack, and switches. As far as the transformers, I'm not sure if yours will be the same, but there's not much to that anyway.

You're gonna love the kit. I know a did. Cool


	Logged

Chris

Ceriatone HRM 50
w/self built Dumblelator
Avatar 2X12 w/WGS ET-65 & Veteran 30
TC Electronic 2290
2001 PRS McCarty
2010 PRS 513 Swamp Ash
Tacoma JK50C
Seagull S12+

T Wilcox
Sr. Member

Offline

Gender: Male

Posts: 399

Re: OTS FM50 kit in transit

« Reply #2 on: February 25, 2011, 09:14:23 PM »

Thanks for the quick reply SoundPerf
I will pick up a M3 nut driver today or 2

And yes I am so excited I have probably soldered about 10 OTS's in my dreams over the last couple of weeks. You know you are obsessed when you dream of Long tail pairs and capacitor values.

Thanks again and best of luck with your HRM project.

Todd


	Logged

sduck
Full Member

Offline

Gender: Male

Posts: 173

Re: OTS FM50 kit in transit

« Reply #3 on: February 26, 2011, 04:25:19 AM »

I just used pliers and screwdrivers to put my BM50w together. Nut drivers can be nice, but aren't necessary.


	Logged

SoundPerf
Sr. Member

Offline

Gender: Male

Posts: 392

Re: OTS FM50 kit in transit

« Reply #4 on: February 26, 2011, 07:11:21 AM »

Quote from: sduck on February 26, 2011, 04:25:19 AM

I just used pliers and screwdrivers to put my BM50w together. Nut drivers can be nice, but aren't necessary.

Yep, that's what I have been doing. In fact I'm not sure if a nut driver will be the most appropriate in some areas. But then again there were some situations that one would make easier. I have a few nut drivers but they're all standard sizes. You know here in the states we don't like the metric system. Undecided


	Logged

Chris

Ceriatone HRM 50
w/self built Dumblelator
Avatar 2X12 w/WGS ET-65 & Veteran 30
TC Electronic 2290
2001 PRS McCarty
2010 PRS 513 Swamp Ash
Tacoma JK50C
Seagull S12+

erwin_ve
Full Member

Offline

Gender: Male

Posts: 158

Re: OTS FM50 kit in transit

« Reply #5 on: February 26, 2011, 08:28:58 AM »

You also need heatshrink, some extra hook-up wire(in case you screw up, don't ask).
A soldering station is very handy when it comes at soldering a buss bar(hotter). and capacitors(less hot).
Long flat pliers are a charm to work with, especially when the built is half completed. Don''t use leadfree solder it's a pain in the *ss.


	Logged

Pages: [1]

« previous next »

	Welcome, Guest. Please login or register. Did you miss your activation email? November 22, 2024, 04:09:08 AM

News: Ceriatone Forums are up and running!!! Guests please register Note: If you want to help you can to keep the forums alive. Do you want to advertise on this forum ? Send me a private message.