Here's a link to my build thread at another forum for anyone interested. Hope this helps! Big thanks to Nik @ Ceriatone for troubleshooting at the end and for Mcinku for his build thread which helped.

The thread shows the 100W HRM BM and the C-lator.

Here's the link.

http://www.rig-talk.com/forum/viewtopic.php?f=3&t=70633

Here's my photobucket link for pics..

http://smg.photobucket.com/albums/v344/PeeMonkey/Ceriatone%20100w%20HRM%20Build/

Side notes/Tips.. I wish I knew before building

1. Do not peel the white backing to the back/face plates, the plates are held up by the pots/hardware.
2. For 3 & 5 lug terminal strips, do not use the middle lug unless you intend to ground it.
3. For the C-lator build, scrape off the paint at the ground lugs before you build it. Or else it wont provide a ground to the chassis, I learned this the hard way.
4. For Power Transformer wiring, for the 60v and 6v it is in AC so it does not matter which one you use for 60v / 0v.
5. Fit transformers to make sure everything alligns (I used Mercury Magnetic transformers) so I had to drill some extra holes.

Thanks! Yeah I found it odd and emailed Nik, he said the master only works in clean mode, so it's fine.

Building amps is fun isn't it.

Mark my words... this is not your last amp you built   


... just look at me.... right now I'm starting on Prinzetone