|
Title: Ceriatone 100w HRM BM / C-lator - documented build thread link Post by: cyndicate on June 10, 2010, 06:18:03 PM Here's a link to my build thread at another forum for anyone interested. Hope this helps! Big thanks to Nik @ Ceriatone for troubleshooting at the end and for Mcinku for his build thread which helped.
The thread shows the 100W HRM BM and the C-lator. Here's the link. http://www.rig-talk.com/forum/viewtopic.php?f=3&t=70633 Here's my photobucket link for pics.. http://smg.photobucket.com/albums/v344/PeeMonkey/Ceriatone%20100w%20HRM%20Build/ Side notes/Tips.. I wish I knew before building 1. Do not peel the white backing to the back/face plates, the plates are held up by the pots/hardware. 2. For 3 & 5 lug terminal strips, do not use the middle lug unless you intend to ground it. 3. For the C-lator build, scrape off the paint at the ground lugs before you build it. Or else it wont provide a ground to the chassis, I learned this the hard way. 4. For Power Transformer wiring, for the 60v and 6v it is in AC so it does not matter which one you use for 60v / 0v. 5. Fit transformers to make sure everything alligns (I used Mercury Magnetic transformers) so I had to drill some extra holes. Title: Re: Ceriatone 100w HRM BM / C-lator - documented build thread link Post by: rogb on June 11, 2010, 02:54:31 AM Here's a link to my build thread at another forum for anyone interested. Hope this helps! Big thanks to Nik @ Ceriatone for troubleshooting at the end and for Mcinku for his build thread which helped. The thread shows the 100W HRM BM and the C-lator. Here's the link. http://www.rig-talk.com/forum/viewtopic.php?f=3&t=70633 Here's my photobucket link for pics.. http://smg.photobucket.com/albums/v344/PeeMonkey/Ceriatone%20100w%20HRM%20Build/ Side notes/Tips.. I wish I knew before building 1. Do not peel the white backing to the back/face plates, the plates are held up by the pots/hardware. 2. For 3 & 5 lug terminal strips, do not use the middle lug unless you intend to ground it. 3. For the C-lator build, scrape off the paint at the ground lugs before you build it. Or else it wont provide a ground to the chassis, I learned this the hard way. 4. For Power Transformer wiring, for the 60v and 6v it is in AC so it does not matter which one you use for 60v / 0v. 5. Fit transformers to make sure everything alligns (I used Mercury Magnetic transformers) so I had to drill some extra holes. Hi there, just finished my HRM too. Very good build thread there, well done! I also noticed you mentioned that the Master didn't work on the OD channel. Mine also, is this right or did I do something wrong too? I was going to email Nik about this but I have probably bugged him enough... LOL Title: Re: Ceriatone 100w HRM BM / C-lator - documented build thread link Post by: cyndicate on June 11, 2010, 05:54:01 AM Here's a link to my build thread at another forum for anyone interested. Hope this helps! Big thanks to Nik @ Ceriatone for troubleshooting at the end and for Mcinku for his build thread which helped. The thread shows the 100W HRM BM and the C-lator. Here's the link. http://www.rig-talk.com/forum/viewtopic.php?f=3&t=70633 Here's my photobucket link for pics.. http://smg.photobucket.com/albums/v344/PeeMonkey/Ceriatone%20100w%20HRM%20Build/ Side notes/Tips.. I wish I knew before building 1. Do not peel the white backing to the back/face plates, the plates are held up by the pots/hardware. 2. For 3 & 5 lug terminal strips, do not use the middle lug unless you intend to ground it. 3. For the C-lator build, scrape off the paint at the ground lugs before you build it. Or else it wont provide a ground to the chassis, I learned this the hard way. 4. For Power Transformer wiring, for the 60v and 6v it is in AC so it does not matter which one you use for 60v / 0v. 5. Fit transformers to make sure everything alligns (I used Mercury Magnetic transformers) so I had to drill some extra holes. Hi there, just finished my HRM too. Very good build thread there, well done! I also noticed you mentioned that the Master didn't work on the OD channel. Mine also, is this right or did I do something wrong too? I was going to email Nik about this but I have probably bugged him enough... LOL Thanks! Yeah I found it odd and emailed Nik, he said the master only works in clean mode, so it's fine. :) Title: Re: Ceriatone 100w HRM BM / C-lator - documented build thread link Post by: rogb on June 11, 2010, 10:45:53 AM Great, thanks for that ;D
Title: Re: Ceriatone 100w HRM BM / C-lator - documented build thread link Post by: mcinku on June 12, 2010, 07:12:42 PM Building amps is fun isn't it.
Mark my words... this is not your last amp you built ;) ... just look at me.... right now I'm starting on Prinzetone ;D Title: Re: Ceriatone 100w HRM BM / C-lator - documented build thread link Post by: cyndicate on June 13, 2010, 01:55:57 AM Definitely! I am starting my Dizzy 30 build really soon :)
|