Welcome, Guest. Please login or register.
Did you miss your activation email?
November 24, 2024, 03:17:25 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.



Amplified Parts
+  Ceriatone Forum
|-+  Ceriatone
| |-+  Overtone
| | |-+  Anyone Using a Zendrive (or derivative) with Their C-Tone?
« previous next »
Pages: [1] Go Down Print
Author Topic: Anyone Using a Zendrive (or derivative) with Their C-Tone?  (Read 6179 times)
rane008
Full Member
***
Offline Offline

Posts: 122


View Profile
« on: August 22, 2012, 04:21:40 PM »

Hey Guys,

Was wondering if any of you were using a ZD with your C-tone.  I had one years ago that I used with my Fender RI 59 Bassman and while I liked it, I don't think I appreciated it fully for what it was.  Also, I think I wanted something with a bit more gain. 

Anyway, I know that Mayer has used them with this 2Rocks and Dumbles, so I thought I'd give it another whirl.  Also, found a local guy here in NorCal who would do a clone for $130, so that cool! 

Thoughts?
Logged
mcinku
Administrator
Hero Member
*****
Offline Offline

Gender: Male
Posts: 1084



View Profile WWW
« Reply #1 on: August 22, 2012, 07:31:34 PM »

I use one... a clone. I took my BB of the board for this one. Together with RC I don't need anything else really.
Logged

Kevster
Jr. Member
**
Offline Offline

Posts: 90


View Profile
« Reply #2 on: August 22, 2012, 09:07:46 PM »

Hey Guys,

Was wondering if any of you were using a ZD with your C-tone.  I had one years ago that I used with my Fender RI 59 Bassman and while I liked it, I don't think I appreciated it fully for what it was.  Also, I think I wanted something with a bit more gain. 

Anyway, I know that Mayer has used them with this 2Rocks and Dumbles, so I thought I'd give it another whirl.  Also, found a local guy here in NorCal who would do a clone for $130, so that cool! 

Thoughts?
I have one in my GCX... It is a ZD1, and it is a good stomp OD.  Would I buy it again? Ahhhh.... probably.  It is a great lead OD pedal.  It doesn't do subtle that well, for that I'd do the OCD again in a minute.....
Logged
StratUltra
Jr. Member
**
Offline Offline

Posts: 98


View Profile
« Reply #3 on: August 25, 2012, 06:14:38 AM »

I have a zen2 which I use. While the pedal is great, I'm in two minds if I should take it off my board. Agree that it doesn't clean up as well as an OCD which I also have
Logged
shebbycaster
Newbie
*
Offline Offline

Posts: 24


View Profile
« Reply #4 on: August 25, 2012, 08:13:48 PM »

I sometimes use a Zen Drive which is a great pedal.  It sounds good with the OTS but I have found that the Zen can be tricky to dial in.  Some people get very frustrated with it. 

The OCD sounds very good and it's a bit easier to zero in on.  It's a no brainer recommendation for anyone who is looking for high quality overdrive. 

If you are looking at a drive or boost pedal from a builder you feel good about and you like their sound clips, chances are it will do just fine in front of the OTS.
Logged
hurtwoodec
Jr. Member
**
Offline Offline

Posts: 79


View Profile
« Reply #5 on: August 26, 2012, 04:40:18 AM »

I use mine to give another channel on my ots. Set for low gain it fills a gap left from clean to the od channel on the amp and then the pab. So I go

ch1 - clean
zen - edgy rythms
ch2 - leads (or more dirty rythms)
ch2 pab - hangin it all out.

it gives me the same ots (dumble flavour) at a lower gain setting than ch2.
Logged

Carol Ann OD-2
OTS 50 modded and modded
Carol Ann Tucana 3
2000 PRS McCarty
2011 PRS CU24 59/09s 5w blade
2009 PRS DGT
2009 Fender CS 1957 Heavy Relic Strat
Tone Control
Sr. Member
****
Offline Offline

Gender: Male
Posts: 274



View Profile
« Reply #6 on: August 29, 2012, 10:42:01 PM »

I have a BM50. I like the internal OD set to a modest amount of grit, but not Santana-type OD

When the BM50 is set to ultraclean I sometimes use a Zendrive 2 with it, works very well for slightly more driven tones
For just a little grit, a Klone
for feel but more grit, a Honeybee clone, backing off the vol with this is very Mayer I think

I could ditch the rest and stick with these 3, but they are all doing something different, so choosing would be hard.
All excellent for playing JMayer-range of sounds on a strat


I tried a Zendrive v1.0. very nice, but the v2 is nicer
Logged

Dr Tone Control, Strats mostly, prefer saturated clean tones, a little OD sometimes
BM50, JTM45, 36w EF86, DZ30, Expression, + non-Ceriatones (Matchless, Victoria, Wienbrock)
Just started with pedals a little after a 10 year purist spell, but usually just delay
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.