Welcome, Guest. Please login or register.
Did you miss your activation email?
November 21, 2024, 10:37:09 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  British Style
| |-+  18 Watt
| | |-+  Installing EF86 in an old Marshall combo		 « previous next »
Pages: [1] Go Down Print
Author Topic: Installing EF86 in an old Marshall combo  (Read 8001 times)
sourpatchkid
Newbie
*
Offline Offline

Posts: 3


View Profile
« on: August 25, 2010, 07:20:52 PM »
Hello everyone,

I'm considering purchasing a pre-built 18w TMB EF86, but I would like to install it in an old Marshall VS65r hybrid combo I have.  It's a simple 1x12" open back cabinet.  Has anyone attempted this (or something similar), and if so how did it turn out?

For those of you who have done conversions like this, what are some things I should consider before I delve into this project?  Any and all advice is much appreciated!

Thanks a bunch!
Logged
sourpatchkid
Newbie
*
Offline Offline

Posts: 3


View Profile
« Reply #1 on: September 09, 2010, 11:25:18 PM »
Hmmm... I guess there's not a lot of traffic in this forum.
Logged
cmoore
Sr. Member
****
Offline Offline

Gender: Male
Posts: 351


View Profile
« Reply #2 on: September 10, 2010, 02:20:55 AM »
Quote from: sourpatchkid on September 09, 2010, 11:25:18 PM
Hmmm... I guess there's not a lot of traffic in this forum.
Those are pretty popular amps, and this forum does get a fair amount of views.....But aren't you suggesting a rather difficult project. I might be way out of bounds, but aren't these two chassis' 180 degrees opposed? Seems like your old combo is the typical top mount with the tubes hanging upside down. But I think most of the 18 watt TMB chassis' are mounted on the bottom, usually in a head, with the tubes oriented in the other direction.  Maybe that is why you have not gotten a respone.....??
Like I said, I do not own either of these amps, so I could be completely wrong....
Good Luck
Logged
yumchild
Newbie
*
Offline Offline

Posts: 16


View Profile
« Reply #3 on: September 17, 2010, 11:39:00 PM »
I don't know about your specific cab, but I built a combo cab for my 36 watt EF86.  Its a clone of a 1974 1x12 combo cab.  The chassis was designed for a head, but it works fine in a combo cab.  With a stock 1974 combo cab you might have to mod it slightly to get the chassis to fit.
Logged
yumchild
Newbie
*
Offline Offline

Posts: 16


View Profile
« Reply #4 on: September 17, 2010, 11:40:13 PM »
Just make sure you have enough depth for the transformers and tubes.
Logged
sourpatchkid
Newbie
*
Offline Offline

Posts: 3


View Profile
« Reply #5 on: September 20, 2010, 03:39:45 PM »
Thanks for the responses y'all (and forgive my impatience Smiley)

I think you're right, hired hand, I thought there might be a way to invert the chassis (so the tubes hand upside down, like a peavey classic 30), but now I see that all those kind of amps have top mounted controls.  My valvestate has the controls mounted on the front (same direction as the speaker faces) and there's definitely not enough clearance for the transformers and tubes.

I think I'm just going to build this up as a head and buy a 2x12 cab to go with it.  There are plenty of good used cabs floating around Austin.

Thanks again - any suggestions for what I should do with the combo?
Logged
cmoore
Sr. Member
****
Offline Offline

Gender: Male
Posts: 351


View Profile
« Reply #6 on: September 20, 2010, 06:33:58 PM »
Quote from: sourpatchkid on September 20, 2010, 03:39:45 PM
Thanks for the responses y'all (and forgive my impatience Smiley)

I think you're right, hired hand, I thought there might be a way to invert the chassis (so the tubes hand upside down, like a peavey classic 30), but now I see that all those kind of amps have top mounted controls.  My valvestate has the controls mounted on the front (same direction as the speaker faces) and there's definitely not enough clearance for the transformers and tubes.

I think I'm just going to build this up as a head and buy a 2x12 cab to go with it.  There are plenty of good used cabs floating around Austin.

Thanks again - any suggestions for what I should do with the combo?

Yeah..... I think that would be the smart way to go. Put it in a head box, and then versatility is the word of the day. Like you said, there are always plenty of new/used speaker cabs to choose from. You can choose between 10's, 12's and all different offerings from Eminence and WGS.....
Sell the combo or save it for a future project, or maybe even trade bait for something else.
Good Luck
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.