Welcome, Guest. Please login or register.
Did you miss your activation email?
November 22, 2024, 09:24:41 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.



Amplified Parts
+  Ceriatone Forum
|-+  Website, Store
| |-+  Support
| | |-+  Muchless Lightning Problem
« previous next »
Pages: [1] Go Down Print
Author Topic: Muchless Lightning Problem  (Read 3387 times)
nonamesleft
Newbie
*
Offline Offline

Posts: 2


View Profile
« on: May 03, 2010, 04:29:23 AM »

so i built my Lightning and quadruple checked everything...turned it on...and...nothing but a couple of very quiet pops through the speaker that turn into a very quiet hum.  The volume pots don't increase the level of the hum much at all, though you can hear a slight sound of the movement of the pot if you listen closely.  In fact, the hum is so quiet (even with volume and master all the way up) that you have to listen hard for it.  Plugging in a guitar to either input provides no changes.
1.  Voltages coming in and out of PT, OT, choke are all at proper levels.  All transformers remain rather cool to the touch.  B+ is good
2.  all tubes (including the rectifier) get full voltage and heat up fine
3.  none of the pots really do anything to add or decrease sound from the speaker.....there is none!
4.  i can get a crackle when i probe every solder joint starting after the last preamp socket...and this crackle is increased/decreased by turning the volume/master pots.

so i am pretty sure this is a problem in the preamp section, but for the life of me i have no idea what the issue is.  all of the preamp tubes are good (checked elsewhere) so it is a wiring issue for sure through nothing is touching where it shouldn't, to my knowledge.


if anyone has any suggestions please let me know!
Logged
nonamesleft
Newbie
*
Offline Offline

Posts: 2


View Profile
« Reply #1 on: May 03, 2010, 01:04:29 PM »

false alarm, i forgot to solder 4 and 5 together on the 12ax7's so only half of each preamp valve was getting any juice...haha
everything is gold now!!
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.