Welcome, Guest. Please login or register.
Did you miss your activation email?
November 21, 2024, 07:29:07 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Website, Store
| |-+  Support
| | |-+  I confess I did something really stupid...		 « previous next »
Pages: [1] Go Down Print
Author Topic: I confess I did something really stupid...  (Read 7464 times)
yumchild
Newbie
*
Offline Offline

Posts: 16


View Profile
« on: February 05, 2011, 03:19:02 AM »
Turned the power on, turned the standby on, no sound...  Turned the volume up, no sound...  bypassed my effects and plugged direct in with the guitar volume all the way up, no sound... Can you guess whats next?

After about a minute I realized I did not have the speaker plugged in.  Powered off, plugged in the speaker.   Powered on again and ... after it warmed up, the sounds were, well not right.  Its, kind of choppy and unpredictable at loud volumes.  I have not been brave enough to turn it back on for quite a while.

This is my 36 Watt TMB / EF86 combo.   Nik built the chassis, I built the cab. 

I was too upset to deal with it for a while, but now I'm over it and ready to face the truth.  Probably needs a new OT, but how do I know for sure?  Would it be safe to buy new tubes and test normal playing, or would I just be throwing new tubes away?

Is there a simple test I can do to tell if the OT is blown, or maybe test a few caps or resistors?  I'm not really comfortable with poking around in the chassis while the amp is on.  Is it possible to do offline checks of some sort?  The amp has not been plugged in to power in more than a month so the caps should be drained.

I could take it to an amp tech, but I don't really know anyone locally and I'd like to see how much I can figure out myself.
Logged
cmoore
Sr. Member
****
Offline Offline

Gender: Male
Posts: 351


View Profile
« Reply #1 on: February 05, 2011, 04:34:29 AM »
Where do you live.?
I assume it worked 100% fine before this little incident.? all kinds of things are possible if you start getting fly-back voltage. You need spare tubes anyway. put in some different power tubes and see what happens. If you are not comfortable working on amps/don't know how; I would not suggest pulling the chassis.
I have seen a few blown OT's, but not way near as many as people think. Don't give up too fast. Try some new power tubes and take it from there.....
Best
Logged
yumchild
Newbie
*
Offline Offline

Posts: 16


View Profile
« Reply #2 on: February 05, 2011, 05:06:26 AM »
Quote from: hired hand on February 05, 2011, 04:34:29 AM
Where do you live.?
I assume it worked 100% fine before this little incident.? all kinds of things are possible if you start getting fly-back voltage. You need spare tubes anyway. put in some different power tubes and see what happens. If you are not comfortable working on amps/don't know how; I would not suggest pulling the chassis.
I have seen a few blown OT's, but not way near as many as people think. Don't give up too fast. Try some new power tubes and take it from there.....
Best
Thanks Hired Hand,

Yes it was working beautifully till then.  I'm in the Spokane Washington area.  I've built some effects pedals and done simple amp repairs.  I have a multimeter and get how to solder.   Just not too excited about taking measurements while the amp is on.  I will try a new set of tubes and let you know how it goes.

Logged
grod915
Jr. Member
**
Offline Offline

Posts: 52


View Profile
« Reply #3 on: February 05, 2011, 12:25:46 PM »
Quote from: yumchild on February 05, 2011, 03:19:02 AM
Is there a simple test I can do to tell if the OT is blown, or maybe test a few caps or resistors? 
     Yes! Yes there is:
http://www.premierguitar.com/Magazine/Issue/2007/Apr/The_Super_Secret_Transformer_Tester.aspx
    Article by the venerable RG Keen.
Logged
JefferyWalsh
Newbie
*
Offline Offline

Gender: Male
Posts: 1



View Profile
« Reply #4 on: February 05, 2011, 01:16:47 PM »
Quote from: grod915 on February 05, 2011, 12:25:46 PM
Quote from: yumchild on February 05, 2011, 03:19:02 AM
Is there a simple test I can do to tell if the OT is blown, or maybe test a few caps or resistors? 
     Yes! Yes there is:
http://www.premierguitar.com/Magazine/Issue/2007/Apr/The_Super_Secret_Transformer_Tester.aspx
    Article by the venerable RG Keen.


This is very good article.And the trick that mention in it are really useful and cool.
Logged
ADSL Filters
yumchild
Newbie
*
Offline Offline

Posts: 16


View Profile
« Reply #5 on: February 06, 2011, 09:36:22 PM »
Oh man, very excited to get this link to test the OT for shorts!  thanks so much for that.  I will try it and let you know the results.
Logged
yumchild
Newbie
*
Offline Offline

Posts: 16


View Profile
« Reply #6 on: February 21, 2011, 06:32:31 PM »
Great news, I replaced all the tubes and this tone machine is back to fully functional!

Thanks everybody.
Logged
grod915
Jr. Member
**
Offline Offline

Posts: 52


View Profile
« Reply #7 on: February 21, 2011, 09:24:48 PM »
Cool! Cool (I love a happy ending)
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.