Welcome, Guest. Please login or register.
Did you miss your activation email?
November 24, 2024, 04:16:20 AM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Website, Store
| |-+  Support
| | |-+  Fender 5f6a build		 « previous next »
Pages: [1] Go Down Print
Author Topic: Fender 5f6a build  (Read 5604 times)
steves3972
Newbie
*
Offline Offline

Posts: 2


View Profile
« on: June 04, 2012, 11:02:53 PM »
I’ve been trying to finish a build using the ceriatone 5f6a layout using classictone transformers.
I am getting very low voltage readings at all tube sockets.
I have double checked that all the resistors on the board are the correct value and tested all of them. But I am still losing voltage somewhere.
There is a 100k resistor on the standby switch and I am not sure of it’s purpose. On one side of the standby switch I was getting 400volts then on the other side after the 100k resistor I was getting around 100volts. This doesn’t seem right to me.
Can anybody suggest what I need to do?
Many thanks
Logged
wyatt
Guest
« Reply #1 on: June 05, 2012, 03:35:03 AM »
Please be very careful while checking this, it is high voltage.

So, when you put your red probe on the Standby switch's solder lug connected to Pin 8 of the rectifier...and your black probe to Ground...you get 400VDC?

And when you put your red probe on the Standby switch's solder lug that connects to point "A" on the layour...and your black probe to ground...you get 100VDC?

You haven't even reached the first filter caps?

If this is the case...there is only three things inbetween..the switch, its resistor and its cap....try jumping the switch lugs to bypass the Standby switch.  Now does your 400VDC pass on to the filter caps and choke?

Here is your schematic, it's what you need to trace everything through to troubleshoot...layouts are for construction.
http://www.amparchives.com/Amp%20Archives/Fender/Schematics/bassman-5f6-a-schematic.gif
« Last Edit: June 05, 2012, 03:42:20 AM by wyatt » Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.