|
Title: Assembly Manuals Post by: plexi54 on August 26, 2009, 04:15:12 PM Hi,new member here,can anyone inform me if there are assembly manuals with
the kits from Ceriatone,I couldn't see any information on the web site,thanks for your help. Title: Re: Assembly Manuals Post by: hywelg on August 26, 2009, 06:45:07 PM No, no manuals, onlys a layout drawing. Nik would say that if you can't interpret the layout drawing its probably too advanced for you.
Title: Re: Assembly Manuals Post by: cmoore on August 26, 2009, 07:10:07 PM Is there something specific you are wondering about?
Title: Re: Assembly Manuals Post by: tonym on October 27, 2009, 09:47:32 PM yep... no manuals!
in my opinion thats the hardest bit. No proper setup routine - make your own up. compared to others I have seen this is a ball ache. No proper schematic either - so it's a little harder to pin down when theres a problem. BUT - you have the forum - and these guys are very helpful I'm sure. Title: Re: Assembly Manuals Post by: fpaul on November 20, 2009, 12:42:17 PM Following layout is easy enough; would be a good idea to document startup/bias procedure somewhere, also maybe some guidelines for which wires to twist together, voltage readings, and how to discharge the caps. I found the info easy enough on another site but just a suggestion to put it somewhere on the Ceriatone site.
Also, to my suprise, a schematic printed out as a second page when I printed the layout for my Plexi50. Didn't actually use it yet but was glad to have it. |