Welcome, Guest. Please login or register.
Did you miss your activation email?
November 21, 2024, 04:49:07 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Website, Store
| |-+  Support
| | |-+  6v6 red plating on OTS 20 Lunchbox		 « previous next »
Pages: [1] Go Down Print
Author Topic: 6v6 red plating on OTS 20 Lunchbox  (Read 4162 times)
Sam Slick
Newbie
*
Offline Offline

Posts: 20


View Profile
« on: July 27, 2013, 01:07:11 AM »
I finished building my lunchbox 20w OTS and when I fired it up, the power tube closest to the mains fuse started glowing red when I flipped the standby switch to on.  I swapped tubes with another set of 6v6s with the same result.  I hear a low hum from the speaker cab when I flip the standby switch to on.  As far as I  can tel, the wiring looks good to both power tubes. Any suggestions? 
Logged
wyatt
Guest
« Reply #1 on: July 29, 2013, 03:21:13 AM »
What are the voltages at the tube sockets?

Have you properly biased the tubes?

If you are red plating the tubes are dissipating probably more than 150%. That ever means they are biased way too hot or the plate voltage is excessive.
Logged
Sam Slick
Newbie
*
Offline Offline

Posts: 20


View Profile
« Reply #2 on: August 17, 2013, 02:27:38 PM »
Thanks Wyatt... 

The problem wound up being that I had the polarity reversed on the 47uf / 450 volt cap nearest the first 12AX7 tube.
That problem being resolved, now the amp is oscillating.  Biasing does not resolve the oscillation.  I am troubleshooting that now. 

Also I have a question about the spare parts that were sent with the kit...  There is a 1M resistor, a .22uf cap and a.1uf cap.  Any ideas on what these parts are for? I'm still learning from the masters like you!

Grasshopper
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.