Welcome, Guest. Please login or register.
Did you miss your activation email?
November 22, 2024, 03:42:00 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Website, Store
| |-+  Support
| | |-+  1st power up with Variac		 « previous next »
Pages: [1] Go Down Print
Author Topic: 1st power up with Variac  (Read 6062 times)
GuitarHack
Jr. Member
**
Offline Offline

Posts: 57


View Profile
« on: May 15, 2011, 06:36:26 PM »
Can anyone supply or point me to some info on how to use a variac for 1st power up?
Thanks
Logged
OTS 50
2004 PRS Single Cut Trem
Mollenhauer Strat
custom Paduk neck-through Strat
Mack Heatseeker 36
Peavey Classic 50
T Wilcox
Sr. Member
****
Offline Offline

Gender: Male
Posts: 399



View Profile
« Reply #1 on: May 18, 2011, 12:58:44 PM »
It seems that most people that do the safe power up, do the light bulb method.
I took the cross your fingers and hope it works approach! It worked!
Hopefully someone that has used the variac method will chime in.

Todd
Logged
Plexi bass 1986 ( build #6 )
Ceriatone Ultra Champ ( build #5 )
TW Express clone ( build #4 )
Ceriatone HRM MK2 ( build #3 )
Ceriatone 2550  ( Build #2 )
Ceriatone OTS FM50 Modern Eagle Mod (Build #1)
EBMM Steve Morse original
50th anniv American Strat
cmoore
Sr. Member
****
Offline Offline

Gender: Male
Posts: 351


View Profile
« Reply #2 on: May 18, 2011, 07:59:14 PM »
I would not use a Variac to power up your build.
If you are worried/cautious, use a light bulb limiter.
Best
Logged
MrGoldTop
Newbie
*
Offline Offline

Gender: Male
Posts: 30



View Profile
« Reply #3 on: May 18, 2011, 08:24:29 PM »
+1 On the lamp method. Positive results (On or Off). No gray areas. Really inexpensive too.
Logged
GuitarHack
Jr. Member
**
Offline Offline

Posts: 57


View Profile
« Reply #4 on: May 19, 2011, 06:30:09 AM »
Thanks for responding.
I thought I read the Variac method was best, and I happen to have one.
I figured you would set it at a low voltage and measure at certain points to see if there was juice where its supposed to be and no juice where there's not supposed to be.
As I understand, the light bulb method just tells you whether or not you have a major short.

Is there a diagram or explicit instructions on how to do the bulb thing?
Do you do it with tubes in or out?  Speaker connected or not?

I'm ready and anxious to power up!
I have a gig this Saturday.
Cheers
Jon
Logged
OTS 50
2004 PRS Single Cut Trem
Mollenhauer Strat
custom Paduk neck-through Strat
Mack Heatseeker 36
Peavey Classic 50
grod915
Jr. Member
**
Offline Offline

Posts: 52


View Profile
« Reply #5 on: May 19, 2011, 11:00:19 AM »
Paul Ruby amps has a great start up article here: http://paulrubyamps.com/info.html
Logged
cmoore
Sr. Member
****
Offline Offline

Gender: Male
Posts: 351


View Profile
« Reply #6 on: May 19, 2011, 03:38:29 PM »
You are too worried about power up. Unless you have done something REAL STUPID, the worst that will happen is you will blow a fuse. I seriously doubt this applies to you.
Enter the bulb limiter. It keeps your fuse from blowing so you can look for problems without repeatedly replacing a 2 dollar fuse. They are easy to build, as in the link below.
Best
http://tubenewbie.com/light_bulb_current_limiter.html
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.