Welcome, Guest. Please login or register.
Did you miss your activation email?
November 23, 2024, 08:16:13 AM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Muchless
| |-+  Stray Cat 30
| | |-+  low sound on the gain ch?		 « previous next »
Pages: [1] Go Down Print
Author Topic: low sound on the gain ch?  (Read 14704 times)
chuckb
Newbie
*
Offline Offline

Posts: 15


View Profile
« on: April 13, 2012, 08:09:53 PM »
I have just finished a build based on the ceriatone layout. I have loads of volume on the clean ch but very low vol on the gain ch. I'm thinking i have a wrong value resistor somewhere. i checked and re- checked but everything seems to be right according to the layout. There is one resistor I'm not to sure of the value and it's the one printed in red on the layout. pin 8 on v3? i have a 56k in there now. any help would be greatly appreciated.

Chuck.
Logged
chuckb
Newbie
*
Offline Offline

Posts: 15


View Profile
« Reply #1 on: April 13, 2012, 08:12:45 PM »
oh yeah, I need to max out the gain,level, and M vol to get any sound from the gain ch?

Chuck.
Logged
chuckb
Newbie
*
Offline Offline

Posts: 15


View Profile
« Reply #2 on: April 13, 2012, 09:37:11 PM »
Anyone?
Logged
chuckb
Newbie
*
Offline Offline

Posts: 15


View Profile
« Reply #3 on: April 14, 2012, 01:10:18 AM »
hey guys, is the wiring for the rectifier on the layout printed correctly?
Logged
drew.12345
Newbie
*
Offline Offline

Gender: Male
Posts: 13


View Profile
« Reply #4 on: April 14, 2012, 01:22:11 AM »
Chuckb,
If your clean channel loud and proud it may be that you have a weak solder somewhere or a grounding issue. Have you tried reflowing you solder joints especially around your gain channel inputs?
The volume of the gain channel comes on pretty quickly using the master and it's VERY loud.
Drew
Logged
cmoore
Sr. Member
****
Offline Offline

Gender: Male
Posts: 351


View Profile
« Reply #5 on: April 14, 2012, 02:00:15 AM »
Yeah, check Every Thing between the in jack and the tube.
Speaking of tubes.....it is possible to have 1/2 of an AX7 go bad. Did you try a simple tube replacement.?
Best
Logged
chuckb
Newbie
*
Offline Offline

Posts: 15


View Profile
« Reply #6 on: April 14, 2012, 02:20:50 AM »
hey guys, i tried the re-solder thing and did a tube swap on all the preamp tubes as well and nothing. I've been through the amp and I still can't find the problem. I'll change out the input jack for the gain side and see if there is an issue with that.

chuck.
Logged
drew.12345
Newbie
*
Offline Offline

Gender: Male
Posts: 13


View Profile
« Reply #7 on: April 14, 2012, 11:34:21 AM »
Chuck,
If that doesn't work post some pics of your inputs, preamp and pot wiring on your gain and master.
Where about are you located?
Drew
Logged
chuckb
Newbie
*
Offline Offline

Posts: 15


View Profile
« Reply #8 on: April 14, 2012, 01:08:17 PM »
Hey drew, i'm here in Canada. I'll send you some pics of the preamp and the pots if this doesn't work. Although I believe it may be the input. I'll post later on my findings.

chuck.
Logged
drew.12345
Newbie
*
Offline Offline

Gender: Male
Posts: 13


View Profile
« Reply #9 on: April 14, 2012, 08:04:16 PM »
Chuck,
Sure.
I am about an hour north of Toronto that's why I asked.
Have you built a lot of amps before this?
Drew
Logged
chuckb
Newbie
*
Offline Offline

Posts: 15


View Profile
« Reply #10 on: April 16, 2012, 10:43:42 AM »
hey drew, yes, Ive built about fifteen amps ,ie bad cat hot cats,matchless lightning,tweed deluxe,5f4 super tweed, 59 bassman,18watt tmb,etc. still have alot to learn though.

chuck.
Logged
drew.12345
Newbie
*
Offline Offline

Gender: Male
Posts: 13


View Profile
« Reply #11 on: April 16, 2012, 11:43:33 AM »
Nice,
What is the status of the amp thus far? Is the gain channel working as of yet? What kind of input jack are you using?
Drew
Logged
chuckb
Newbie
*
Offline Offline

Posts: 15


View Profile
« Reply #12 on: April 16, 2012, 07:59:46 PM »
Hey drew, I haven't been able to get the gain ch working as it should yet. I get an blue arching on the rectifier tube and have blown a fuse. I tracked all my wiring and cannot see any errors but clearly something is blowing the fuse.When in ss mode the amp runs ok but still no high volume. I decided to take out the ss rectification and just go with the rectifier tube , i also disconected the pentode/triode switch but I ran into some problems as to where the wiring from pins 4 of the power tubes and how they are to be connected. i blew anothe couple of fuses. so at this point I decided to step away from it for awhile. I'll probably go back tonight and see where things stand . I'm still uncertian of how to wire pins #4 of the power tubes whith the 1/2 power switch taken out?

Chuck.
Logged
drew.12345
Newbie
*
Offline Offline

Gender: Male
Posts: 13


View Profile
« Reply #13 on: April 17, 2012, 01:18:16 AM »
Chuck,
Can you post some pics so we can see what is going on?
Thanks

Drew
Logged
chuckb
Newbie
*
Offline Offline

Posts: 15


View Profile
« Reply #14 on: April 17, 2012, 10:48:05 AM »
hey drew, I'll post pics as soon as I get a camera. My camera is broken.

chuck.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.