Hi y'all,

the headline says it all: I'm looking for a Bluesmaster 100W in Germany/or close.

Got some amps (Fuchs, VOX, Engl, Fender),
speakers (Celestion, Eminence) or
effects (Dunlop, MXR, ProCo, Ibanez, etc.) to trade if interested.

Any offers considered!

Thanks,
Marc

Hi,

sorry it's been a while, but I've been extremely busy. I promised to post about different instrument/amp cable lengths: I tried as you suggested Mitch, but there is only little difference in the highs, whether there are my (all true BP) effects are in or not.

Mcinku, thank you so much for your tips concerning the mods, I will try esp. the PAB 4.7M.

Dannysgrandpa, could you please explain the 'master pot' mod you mentioned? That sounds very interesting!

Concerning the channels, I'm using them both. But the concept is different than with my other amps. I use both channels at the same volume, dialling rythm/solo with my Strat vol. The OD-pedals I use (T-Rex Dr Swamp & TS) are just there for colouring the sound (& deliver mean distortion when needed  ).

Now, with all that tweaking, fiddling and twisting knobs, I just wouldn't get anywhere, that is in connection with the Marshall cab I was using (4x Vin30, I believe the Chinese ones). The Vox cab-speakers are supposed to sound similar, and they do to my ears. So I got me a pair of Emi Red White & Blues, & put them into the open-back Vox cab.......

In connection with all my other heads (Marshall 1987/Hiwatt Dr 103 / Fender Bandmaster) the cab sounds bright, but the OTS makes it sound dark, bass heavy, and with the mids drowning the sound.

I saw Marin's vids the other day. On my OTS, the strat does not sound like this, even with bass & middle on 0, and only bright & presence all the way up.

Could it be that there were some tweaks in the circuit lately, that make the amp sound so bassy?

I relaize that on my amp, the mid-pot will do almost nothing, whatever the setting for bass or high is - do you have similar experience?

Is there some trick with the OTS also being out of phase (I read on the Fuchs-forum that their amps are; they suggest an out-of-phase cable for amp/cab connection to solve this)?

Hi,

Mitch, thanks for your comments!

Actually, the guitar I'm using has a treble bypass on the volume pot, allowing the highs to pass as volume is turned down. Does someone have similar problems & can recommend a buffer-amp to reduce the mids? ...I also read the Klein-U-Lator brings back some chime, is that correct?

The Vox-Box itself is supposed to have quite a bit of top-end... I used to think that the 'boxy' mids come from a closed back cab, but this seems not to be the case.

Cables I use less than 6 months old Whirlwinds, w/Neutrik jacks, so this should be OK?

Maybe one of you can comment on the volume issues w/PAB boost & Jazz/Rock-settings? I should mention it doesn't make a difference if it's Strat or Les Paul, the volume increse (PAB) or -loss (switching 'rock' to 'jazz') is enormous. Is there a way to adjust this?

Tonight at practice I will try to connect a very short cable w/out effects & post the results tomorrow. Mitch, what kind of buffer amp are you using?

Grateful for your help!

Hi,

I'm running a OTS through a 2x12 open back (Wharfedale, Vox-cab), and I'm having some sound difficulties.
Before giving away the amp to have it modded/repaired, I'd like to know if some of you have experienced similar things:

1. The amp seems to have a 'mid-monster inside' - I see people getting very sparkling clean tones out of the amp, but mine just won't do it. Also I noticed the 'high' & 'bass' knobs do a lot, but the 'mid' knob only makes very little difference in the sound when turning from 0 to 10. With my 60 Strat, the mids are always over-pronounced, and I just can't get rid of them. When engaging the boost by footswitch, the only thing left is mids. It sounds like a blanket is put in front of the cab.

2. When engaging the mid-boost by footswitch, the volume doubles (at all 'master' settings). Is there any way to reduce the volume increase? As it is, the boost is not usable even when I dial in a 'rythm-volume' sound - when engaging the boost the output doubles, which is just too loud.

3. When switching from 'rock to 'jazz', I loose a lot of volume. Even with the master & input both on '10', I cannot compete with the rest of the band in the 'jazz' setting.

4. When engaging the overdrive-switch, I must set 'drive' & 'ratio' both below 3 in order not to get a volume increase in comparison to clean volume. I have seen zucker's vid's on youtube, where he demonstrates the amp with all knobs on 5, and the volume seems to be quite even on all clean & OD settings?

I have tried the amp with different cabs, from 1x12 open to 4x12 closed backs, but the problems always stay the same. I would really like to keep the OTS, and therefore would be glad if you could post your experiences. I have only got a comparison with a Kitty Hawk Std. (supposed to be a D***-clone as well), which sounded totally different than my OTS.

I should mention that mine came totally assembled by Nik, and I haven't made any changes to it. It arived late June 2008, when it arrived the chassis was bent a bit during transport, but it has been working fine.

I am quite desperate, having bought 2 cabs for the amp, beacuse I thought it maight just be the speakers limiting the sound. And I do not know a capable tech in Northern Germany, so if anyone could help, I would be very thankful!

Thank you for all your input, it is really very much appreciated!