 Show Posts
|
|
Pages: [1]
|
|
1
|
Ceriatone / Overtone / Re: HRM BM100 Deep switch wiring is wrong on the layout drawing
|
on: October 27, 2010, 04:22:28 AM
|
|
Yes it is a bit tricky. You have to take the resistors attached to the top two contacts and move them to the bottom 2 contacts. Vice versa for the resistors and cap on the bottom two contacts. Those get moved to the top two contacts. Once you have a tech do that the switch will work in the up position.
|
|
|
|
|
2
|
Ceriatone / Overtone / HRM BM100 Deep switch wiring is wrong on the layout drawing
|
on: October 09, 2010, 04:04:44 AM
|
|
If you are building the HRM BluesMaster 100, the wiring diagram on the layout drawing is wrong for the Deep Switch. The top 2 contacts and components need to be flipped with the bottom two contacts and components on the DPDT switch to get it to engage in the up position.
|
|
|
|
|
3
|
Ceriatone / Overtone / Re: HRM BM100
|
on: October 09, 2010, 03:59:20 AM
|
|
This question got answered today with a friends help. As many know, the layout drawing from Ceriatone's site is completely wrong. If anyone is building their own and needs help contact me for the correct wiring.
|
|
|
|
|
4
|
Ceriatone / Overtone / HRM BM100
|
on: October 07, 2010, 08:54:37 PM
|
|
I just finished building my first amp, the HRM BM100. Everything is going well functionally except for the pedal. I had to rewire because of the orientation issue with the layout drawing and seem have the PAB and OD on the correct side. Thing is the lights are off when the PAB and OD are engaged. It seems like you would want the lights to turn on when the boost is engaged. Can someone help me with this as the wiring looks good in the box. Compared to the rest of the amp this little pedal should be easy. Also, if someone has a picture of the inside of the pedal that would help me check my work. Thanks!
|
|
|
|
|
|
to keep the forums alive.