Does anyone out there have a pic of a COMPLETED pcb heater build for a yeti or chupa?  I have redone this thing about 8 times and every time it runs 6.06 volts for about 1 minute then drops to 2 volts.  Nik at ceriatone said i have done it wrong and i am outta ideas.  Thinking of buying a turrett and going at it from that angle

Turd....help....i am dying on this pcb?  I just can't get stuff to line up!   Anyone...please help!

Oh thank you...my noggin is working on this, but my neurons just aren't firing right!

Mr furgeson....can you help me understand the pcb connections as the diagram and the received board are nothing alike?

Thank you so much...pictures really do help!   All right...off to building

Oh by the way...as I live in the US and will use 120 volts, what do i do with the extra wires for the other voltages...cut and cap em'?

Thanks again....i did get the ceriatone/promithius trannys.  I am a ways from testing though.   Did i read right that someone said the bias resistors at 56 k won't get you the bias i need?  I anticipate having it assembled by october......not much free time right now with my job kicking my butt.   Did you do your initial power up with a variac?

Sweeeet!   Thanks, i was wondering how to do it.....
I am sure i'll have more questions coming up.....thanks again

Mr ferguson...do you have any more pics.....like the pcb for the dc heaters

Thanks guys....i appreciate the help.   I am sure i will have more questions later as i get further in this build.

I hope someone can please help me.   On the yeti 50 bill of materials, what is a CT red and black special?  Where does it go?  Does it relate to B And C?
On the layout, what are those things at B and C?  Finally, can someone clear up V1 wiring?   I mean what is going on at the terminals strips?   Like the black blob on the left strip, something there is grounded but what is it?  It looks jumbled to me.  Please someone help
Jon b

   Could someone out there answer some questions please?  On the bill of materials, what are CT Red and Black Specials?  On the yeti 50 schematic, what are the connections on the turret board connected to at letter B and C?   Finally, does anyone have a way to make the V1 wiring of the terminal strips clearer?  I can't tell what is grounded and what isn't, like the left handed terminal strip is confusing to me?  Thanks in advance and forgive me if I can't respond immediately, I only get to view the internet about once daily d/t long work hours and minimal free home time.
JonB