Hi
I'm just wondering if anyone has experienced this. I am finally getting the sound dialled in for the OD channel of my HRM but when I try to use my g major 2 it howls and warbles even when my guitar volume is all the off. It appears to work fine in the clean channel with or with out an over drive pedal on.
The other thing is I have tried using a Tc electronics hall of fame and a flashback delay with no issues on all settings. the only way I can use the gmajor so far is on the clean channel with an over drive pedal. It would b nice to be able to use the OD channel on the amp for another tone choice. I have tried the g major without the clator but the level drops really low on the amp and is not usable on a gig. I have tried the pro and consumer settings on the gmajor.
Any thoughts?
Thanks
Paul

Hi

I'm new to the group. I have an HRM and I seem to be having issues with my C-lator tc combo. When I use just the amp it sounds amazing. But when I connect the loop stuff I am having issues with the sound. It sounds like it is causing an imbalance in the levels from the clean to overdrive channels with the over drive being lower, and even with low gain settings on the drive channel I get this weird mid range honk almost like a comb filter or a flange like sound with the filter off. i also get a squeal sometimes even with guitar volume down all the way.
I put a new tube in V2 and changed out the tube in the c-lator. The c-lator had an ecc88 and I put in a 12ax7 and it almost seems worse.
I bought the gear new pre built. All I did was put the tubes in the amp and biased it.
I would appreciate any input you might have for trouble shooting this.
I have the gain trim on the back set at 12 o`clock and the drive on the front some where around 5 or 6. I think the tube i put in the c-lator was a groove tube mullard style 12ax7
Thanks
Paul