thanks mcinku

i found the solution with nick
i soldered some bridges so i can work without the relay
nick is really a nice guy

thanks

hi all

i find that the problem came from the relay
i am trying to play without the relay until i recieve a new one
do you know how to do that
i am only using the OD channel

regards

hi mcincku

thanks for your quick answer nice
pin1 197v
pin3 1.57v
pin6 202v
pin8 1.45v

regards

hi
i have a overtone bluesmaster 50w since 2 years
yesterday when i started to play i found the OD channel farty
today no more sound ,i must push the level to 10 to hear something
clear channel is ok
i changed the v2 tube with no better results
can someone help??

Hi

I would buy one no hesitations

let us now

hello

i had the same problem i forgot a ground cable on the cinch female connector in the amp

regards

hello fred

i have bought the tone bone in pentode mode
the sound is very good but the volume is not half loud i would say 20 to 30%
i recommend it to play at home

hello

yes its working
i have resoldered all contacts on the overdrive channel and now its OK
The sound is improving every day
i thing it needs a couple of hours to "burn in"
i was septic about this but in fact its getting better from day to day clearer OD and cleans

Hi thanks for the answer
plate voltage on V2 is 187V
Icould not find any cold solder
i hear some sound coming out on overdrive channel when i turn completely on the main volume/level and drive
but not loud at all
perharps you have other points to check

thank you
regards

hi
i have a problem i just finished my bluesmaster 50
the clean channel is very nice but i can not engage the overdrive channel
relay has been tested
thanks for your help