Thanks alot.

BTW it´s an old guitar speaker from an old amp i had.

I have got a Clone from ceriatone.

And i have a old crappy speaker who i figured i could try out. and it seem to be 6,8ohm speaker. I just used a multiM to find that out.
My amp can take 4 ohm 8 ohmm and 16 ohmm. so i need to find out what i should use?

Thanks - Kjartan Már Eyþórsson.


-

I got my vibro champ finished today and i dont´ahve any proplems what so ever. ( did´t have much time to test the amp tho )

i don´t have that boost switch so can´t help you there.

I did send Nik some stupid questions before i finished, just to get sure on few things.
recomend you to do the same

He is a Realy nice and helpfull fellah

And thx for the help 

Yea i think i understand. Guess i did´t get those cables with the kitt :/

I am building me a Vibro Champ.

And i need to figure few things out..

I added A and B in the layout with Paint. And i am asking. where does those lines come from.

A = seems to start but ends nowhere..?

B = is propl just 2 lines and one goes in the midlle on the volume pot and the other one to the left right? both going from the 7 on the tube.



Hope you understand what i trying to say:)

Thanks
Kjartan Már Eyþórsson.

Thx alot  René!

I am  going to make me an BF Vibro champ from ceriatone.

I can´t find anything that says, the kits come in 120V or 220V transformers.

Hopefully it´s 220v as i live in Iceland, but just wanted to be sure, as many other companys
have both 220v and 120v to chose from. ( even thos the 220v is allways more expensive )

This will be my first amp project, know plenty of stuff about electricity and the high voltage danger.

Hopefully this will go safe :

Been reading alot on the internet about amp building and this company seems to have one of the best reputation,
so i want to do it here!