Thanks Guys,

I found two mistakes and was able to solve those problems !
I found my DIN socket in back panel is upside down. Then I changed and wired it again.



I thought that the problem was settled in this and I switched on my OTS ...

But

green light on - clean sound
green light off - OD sound
red light on - boosted
red light off - non boosted

I opened the footswitch, and replaced Brown-wire with Yellow-wire from DIN cable to tarminal.



Thus it was settled entirely.

Jun

Jimmyd, thank you for reply.

In my foot switch, Red light is off - sound is overdriven
My overdrive foot switch seems to function adversely.

Please let me know if you know a cause and a solution?

Thanks

Jun

Guys, I would like to ask you about my OTS Foot switch.

The operation of my OTS foot switch is as follows :

Red light is on - sound is clean.
Red light is off - sound is overdrived.
Green light is on - sound is boosted.
Green light is off - sound is non boosted.

Also opeartion of Manual/Pedal switch when I don't join by pedal is as follows :

overdrive manual position - sound is clean.
overdrive pedal position - sound is overdrived.
preamp boost manual position - sound is boosted.
preamp boost pedal position - sound is non boost.

Are these operation normal?
Please let me know.

Jun

Thanks Guys,

Sound is great. Any kind of setting does an individual sound like OTS.
Of course, Not only overdrive but also clean is amazing. I want to get good reverb for this nice clean sound.

Bias is about 40mv because Nik recommended me 35~40mv.
OD trimmer is about 11 o'clock now, but is not yet fixed.




Jun

I finished OTS kit build.

My assembling process uploaded to YouTube.
 


I could build it on the coattails of Nik smoothly and was able to complete a nice amp!

Jun

Nik recommended me 35 - 40mV

Very interesting !

Very nice Tone!

Guys,

I'm Newbie.
My OTS kit will come around next week! 

I have experience that assembled Metroamp JTM45 kit, but I am slightly anxious about assembling because OTS  is complicated than JTM45.

Please let me know, If you have some tips for new OTS builder.

Thank you