Thanks Wyatt, gonna dig for those measures right now....

Sorry about the technical names, i lost most of my electronics knowledge. I've learned 4 years in electronics, but stopped around 1999....


BTW, how does these input jacks look to you?

Thanx

some more pics

Another thing about the PT; it has 3 red wires. 2 with 340v, 1 with 3,15v. I'm just guessing wich is wich...

I have double checked all the wiring, nothing i could spot wrong.

Hi all,

 After 20 and some hours, i finished the OTS... and the result is just static, to my desapointment     So i did something wrong along the way

I had a lot of doubts during the build. If any of you can help or just tip, please type


I have doubts regarding the Transformers.... Mcinku was kind to send me a picture with the correct wiring for this PT. I've managed to copy it, but i don't know if it's still well connected. With the PT comes a colour code for the wires. I wrote it on "PT wire codes.jpg" (very small numbers, sorry).

The two wires from the choke are not differentiate?

The Primary of the OT has 3 wires, two wires for lug nº3 of each 6l6; The third goes to the 200uf Cap, with a choke wire? It's there on the schematic, but i'm not sure if im reading well...

Another thing about the schematic is the power amp in and preamp out jacks. The perspective of the schematic tells me wires N and T are on the lugs closer to chassis. But on Ceriatone OTS pics, you see the other way around... So i followed the pics.



 

Thanks, tried the drill, but went for the file instead. Not so bad, actually. much easier than pedal enclosures

Thanks for the info, now i have the courage to drill the thing. Ill post the results afterwards.

Hi everyone,

just got an OTS kit through TRM audio, Slovenia. The transformers were sold by TRM, brand is PETEZE. As you can see in the picture, the chassis holes don't fit with PT holes 

is there a way to fix this? Has anybody come across this problem yet?

It seems that is already available ! http://www.ceriatone.com/productSubPages/Overtone%20LunchBox/OTSLunchBox_Complete.htm


The layout isn't available yet, but the soundclips sounds good:)

Still, i would like to hear the cleans and if it has enough headroom...