Hi,

I stopped using my interrupt loop as I was not happy about the sound nor was I happy about the volume LEDs going into red on my Rocktron Intelliflex. I also have a standard stomp pedal (delay) and at high volume it's on/off LED starts blinking - even when it is off.  I read the forums and deduced that I need a buffer - transistor or valve. I have read that the signal now is approx +2db and with some +4db pedals this is too little (me thinks...). You can fiddle about with the rack settings -10db/+4db and adjust the input/output volumes accordingly but I began not to trust it.

I left it without adding a buffer and now don't use it at all... I have an o/d pedal up front and add my stomp box delay pedal last in line - this works as it is after the o/d pedal. I do not get too much breakup with my Strat so the desired 'place after the preamp stage' is redundant. If I was to play on full with a Les Paul then that would be different as there would be gain at the preamp-stage.

Cheers Brett