bias adjustment plexi50

stratolounger
Newbie

Offline

Posts: 14

bias adjustment plexi50

« on: January 13, 2010, 04:23:11 PM »

What kind of milliamps are you guys running in your plexi50? I was thinking of 25-30.


	Logged

cmoore
Sr. Member

Offline

Gender: Male

Posts: 351

Re: bias adjustment plexi50

« Reply #1 on: January 13, 2010, 07:05:59 PM »

30 milli amps would certainly be a common ground. But you need to consider two other factors:
1. Your Tone. How do you like the way your amp sounds and responds to your touch with a certain bias.
2. Milli amps by themselves are only half the equation. You need to check you plate voltage and make sure you are not running too much past 70%-80% dissipation. At some point there are diminishing returns regarding tone and tube life. Certainly if you are red plating your bias is too positive.
Good Luck


	Logged

stratolounger
Newbie

Offline

Posts: 14

Re: bias adjustment plexi50

« Reply #2 on: January 13, 2010, 08:48:20 PM »

Thanks, hiredhand I found a couple of minor problems before I fired the amp up and now it seems to be idling quite nicely and seems very low noise. I've got to hand it to Nik, he does an excellent job with his kits and completed amps. I'll post my review once I break in all the capacitors/etc.


	Logged

stratolounger
Newbie

Offline

Posts: 14

Re: bias adjustment plexi50

« Reply #3 on: January 21, 2010, 07:34:39 PM »

I set them at 32ma, sounds great!


	Logged

Pages: [1]

« previous next »

	Welcome, Guest. Please login or register. Did you miss your activation email? April 25, 2024, 04:38:21 AM

News: Ceriatone Forums are up and running!!! Guests please register Note: If you want to help you can to keep the forums alive. Do you want to advertise on this forum ? Send me a private message.