|
Title: Well. I was fully intending to do as many mods today as possible, but.... Post by: kenster on May 03, 2008, 01:46:32 AM It turns out that even living in a big town like L.A. (I obviously live there :P) doesn't get you electronics components easily anymore. What was I thinking?? I go down to a local old-school kind of electronics store and he doesn't have even a 1/4 of what I need. I had Jack's Mouser part numbers on my list. The store owner asked what those were, I told him, and he said "hey, I find myself ordering from Mouser too."
Bottom line... I now have a new order of all the goodies in with Mouser. Guess I'll get into the amp next weekend. Who'd think getting all the right parts together would be a challenge all to itself? Cheers - k Title: Re: Well. I was fully intending to do as many mods today as possible, but.... Post by: hywelg on May 03, 2008, 07:57:08 AM AS a preliminary sortie to see what I could find here in the UK prior to considering doing the mods, I found it really difficult to source what I need. I'm going to have to try and persuade my amp tech to order the parts for me I think.
Title: Re: Well. I was fully intending to do as many mods today as possible, but.... Post by: jzucker on May 03, 2008, 10:19:17 PM by the way, my BOM had the incorrect part for the 120pf caps. Here's the right part:
140-500S5-121K-RC Xicon Ceramic Disc Capacitors 500V 120pF SL 10% To Title: Re: Well. I was fully intending to do as many mods today as possible, but.... Post by: hywelg on May 04, 2008, 01:00:57 PM How important is it to source parts from a 'respected' manufacturer, and what name should I be looking for?
Thanks Title: OK, got that.. Post by: kenster on May 04, 2008, 03:02:12 PM I'll go add that to the list. When I was ordering, I noticed that the 120pF cap was something odd and should have questioned it. That's what I get for being in a hurry... oh well. Hind-sight is always 20-20. At least these caps are really inexpensive. Thanks for the heads-up, Jack.
OK, folks. Here's a complete, updated list of all the components (BOM if you will) that Jack prepared recently. This should be all you need to do the mods recommended so far. If somebody notices something wrong or missing, corrections would be most welcome! 140-XAL350V47-RC 350V 47uF 20% 2 ea. 2.650 5.30 588-45F470E 5watts 470 OHMS 1% 4 ea. 1.230 4.92 71-CW2B-3.3K 3watts 3.3Kohms 5% 3 ea. 0.760 2.28 75-516D475M063-E3 4.7uF 63volts 20% 10 ea. 0.270 2.70 598-CD16FD331JO3F 330pF 500V 5% 8 ea. 1.630 13.04 598-CD15FD391JO3F 390pF 500V 5% 3 ea. 1.310 2.62 140-500S5-121K-RC Ceramic Disc Cap 500V 120pF SL 10% 5 ea. .10 .50 660-MF1/2LLT52R222J 2.2K ohms 5% 10 ea. 0.070 0.70 71-RL20S-G-3.3K ½ WATT 3.3K OHMS 2% 10 ea. 0.230 2.30 660-CF1/2CT52R154J 150K ohm 5% 10 ea. 0.100 1.00 71-CMF60150K00FHEK ½ watt 150K ohms 1% 10 ea. 0.180 1.80 71-RL20S-G-220K ½ WATT 220K OHMS 2% 10 ea. 0.230 2.30 581-5KQ331JOCAM 500 volt 330pF 5% 5 ea. 0.250 1.25 581-5MQ391KOBAM 500volt 390pF 10% 5 ea. 0.240 1.20 660-CF1/2C184J 180K ohms 5% 10 ea. 0.050 0.50 660-CF1/2C154J 150K ohms 5% 10 ea. 0.050 0.50 Cheers - Ken Title: Re: Well. I was fully intending to do as many mods today as possible, but.... Post by: jzucker on May 04, 2008, 05:29:56 PM here's a better list. The list you posted includes extras that I ordered for friends' amps.
(2) 140-XAL350V47-RC 350V 47uF 20% (2) 588-45F470E 5watts 470OHMS 1% (1) 72-RWM410-3K9-5 3.9k 3watts 5% (3) 75-516D475M063-E3 4.7uF 63volts 20% (3) 598-CD16FD331JO3F 330pF 500V +/-5% (1) 598-CD15FD391JO3F 390pF 500V +/-5% (1) 140-500S5-121K-RC 120pF 500V +/-10% (2) 660-MF1/2LLT52R222J 2.2Kohms 5% (2) 71-RL20S-G-3.3K 1/2WATT 3.3KOHMS 2% (2) 660-CF1/2CT52R154J 150K ohm 5% (2) 71-CMF60150K00FHEK 1/2watt 150Kohms (4) 71-RL20S-G-220K 1/2WATT 220KOHMS 2% (2) 660-CF1/2C184J 1/2Watt 180Kohms 5% Title: OK, kewl, but I don't mind... Post by: kenster on May 05, 2008, 02:28:34 AM It never hurts to have a few extra pieces around. The little devils might come in handy one day. ;D
Cheers - k Title: Re: Well. I was fully intending to do as many mods today as possible, but.... Post by: jake on May 05, 2008, 10:28:18 PM I gave up and orderd the parts from Nik.
|