|
Title: V1 local feedback circuit Post by: mx on December 10, 2008, 08:07:16 PM Hello,
In troubleshooting my amp build, Nik suggested I remove the feedback components on V1 (the .05 Orange Drop Cap, 470pf ceramic cap and two 22M resistors). That fixed a bad/my solder joint :-[ and the amp went immediately back into the cabinet. My question is...what exactly do those components do tone-wise and am I ill-advised to just leave them out? Thanks, Matt Title: Re: V1 local feedback circuit Post by: JD0x0 on December 10, 2008, 09:59:35 PM i know romoving the .5 uF cap makes the clean channel slightly fatter
Title: Re: V1 local feedback circuit Post by: mcinku on December 11, 2008, 08:43:33 AM Your clean CH becomes more aggressive...less clean headroom, slightly fatter as well
You can use a switch, so you can have both flavours at your finger tips. ;) |