Welcome, Guest. Please login or register.
Did you miss your activation email?
November 22, 2024, 02:44:39 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Ceriatone
| |-+  Overtone
| | |-+  newbie with question		 « previous next »
Pages: [1] Go Down Print
Author Topic: newbie with question  (Read 5427 times)
pepperdog
Newbie
*
Offline Offline

Posts: 9


View Profile
« on: November 14, 2009, 05:37:49 PM »
Hey guys,just finished my ots,and it sounds good,and all the knobs do what they should,but I dont get anything from the rear toggles or the footswitch and it doesnt seam like Iam getting near enough power(volume) from it,any ideas?.I did use a hammond OT and choke,thanks in advance Cry
Logged
pepperdog
Newbie
*
Offline Offline

Posts: 9


View Profile
« Reply #1 on: November 15, 2009, 12:58:21 AM »
Quote from: pepperdog on November 14, 2009, 05:37:49 PM
Hey guys,just finished my ots,and it sounds good,and all the knobs do what they should,but I dont get anything from the rear toggles or the footswitch and it doesnt seam like Iam getting near enough power(volume) from it,any ideas?.I did use a hammond OT and choke,thanks in advance Cry

Alright,I found the volume level problem(this thing is loud and sweet) so now the only problem is the PAB and overdrive switches dont work or the pedal(they dont click,light up,nothing).Other than this it seems fine.Any ideas?
Logged
hywelg
Hero Member
*****
Offline Offline

Posts: 896


View Profile
« Reply #2 on: November 15, 2009, 11:36:29 AM »
Its easy to confuse the wiring of the rear switches and socket and get them the wrong way round. Check against the pics on the site.

Also check you've got the relays the right way round.
Logged
pepperdog
Newbie
*
Offline Offline

Posts: 9


View Profile
« Reply #3 on: November 15, 2009, 04:44:04 PM »
Quote from: hywelg on November 15, 2009, 11:36:29 AM
Its easy to confuse the wiring of the rear switches and socket and get them the wrong way round. Check against the pics on the site.

Also check you've got the relays the right way round.


Thanks, the relays are the little orange thing,correct?I have them in with the lettering facing the pots,from what I've seen in any pics those are right.After I biased it I noticed if I adjust the OD trim pot all the way clockwise I lose all volume,is this normal? Also if I turn the overdrive or ratio knobs all the way down I lose volume,do these things seem right?,thnaks
Logged
pepperdog
Newbie
*
Offline Offline

Posts: 9


View Profile
« Reply #4 on: November 16, 2009, 12:24:52 AM »
I know there  ;)are brains wanting to  be scratced!
Logged
hywelg
Hero Member
*****
Offline Offline

Posts: 896


View Profile
« Reply #5 on: November 16, 2009, 11:50:17 AM »
OK if you are getting sounds but the relays are not working i.e. not clicking at all check that you have 12volts on them. Do you still get sound with the relays removed?

Nik has said many many times that the switch wiring confuses lots of people because the layout is drawn in a particular way and you might have interpreted it incorrectly. Treble check your switch wiring with the photo of your amp on the site.
Logged
pepperdog
Newbie
*
Offline Offline

Posts: 9


View Profile
« Reply #6 on: November 21, 2009, 03:23:47 AM »
hywelg,thanks for the reply's.If I take out the relay closest to the board i dont get anything at all.I cant take out the other  relay unless I remove the switches.Also where do I check for the 12 volts?Iam so excited to get this thing right,I've been playing it and it sounds absolutley fantastic,but I cant wait to get the pedal,and overdrive,ect. working.Any more suggestions?
Logged
hywelg
Hero Member
*****
Offline Offline

Posts: 896


View Profile
« Reply #7 on: November 21, 2009, 09:03:53 AM »
Follow the wires connecting to the 12v power supply board, they connect to one of  the left most two pins on the relay.

If the relay is in the wring way round it wont work. Try it.

Then check contniuity on your pedal, and check how the 12v supply changes at the relay when you operate the switches.

Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.