Welcome, Guest. Please login or register.
Did you miss your activation email?
November 22, 2024, 05:10:50 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.



Amplified Parts
+  Ceriatone Forum
|-+  Ceriatone
| |-+  Overtone
| | |-+  The Three Mods that Rocked my World Most.
« previous next »
Pages: [1] Go Down Print
Author Topic: The Three Mods that Rocked my World Most.  (Read 3289 times)
Captain Cod
Newbie
*
Offline Offline

Gender: Male
Posts: 4



View Profile WWW
« on: March 12, 2013, 02:44:25 AM »

I've had my 50w OTS for about 5 years now, and am very happy with it, especially now.
I usually use a Smartulator with a Lexicon delay/Reverb in the loop and a Port City OS 1x12 cab fitted with the ubiquitous Celestion G12-75.
None of these mods are mine, but I thought I'd share them with anyone new and take this opportunity to thank each of the members here who provided the threads that enlightened me- Bluesfendermanblues, Pickmaster and Bluesking Cool

In reverse order of most profound effect, they are:

1) Series/parellel switch on Smartulator.
From THIS thread.
I much prefer the enhanced transparency of parellel mode, and it's simple enough to put a switch on the front panel of my Smartulator.

2) A switchable negative feedback loop.
Outlined HERE.
I've placed a switch on the back plate to the left of the footswitch jack. Mostly I leave it switched out as I like the looser feel and extra gain.

3) This one is probably the simplest, but had a huge effect on my amps tone...Raising the slope resistor.
I had always found the amp a little wooly and often ran the bass control very low. I actually prefered the control I got with the tonestack in jazz mode, but missed the extra gain a bit. Raising the slope to 200K really tightened up the low end and I'm totally sold on the clearer, sweeter voice.
I realise some guys here prefer to lower it, I'd venture that they're predominantly single coil players perhaps, where the extra girth is an advantage, but I'm a humbucker guy who mainly plays funk, jazz and jazz-rock stuff, and I also play an archtop a bit too, so increasing it and clarifing the lows has been a revalation.

Honary mention goes to putting the OD trimmer on the back- very handy! and a very simple treble bleed on the OD channel, which I now use less after mod #3. Both of these pots are mounted in the two full/half power screw holes on the back plate.
Having used JJs for a while I've switched to a pair os Tung-sol 12AX7s and won't go back now either.

So there they are, some great and simple mods, hope that helps someone, though of course, it's all just my opinion. Wink



Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.