Welcome, Guest. Please login or register.
Did you miss your activation email?
November 26, 2024, 01:21:02 AM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Ceriatone
| |-+  Overtone
| | |-+  Special Overtone Project		 « previous next »
Pages: [1] 2 3 ... 5 Go Down Print
Author Topic: Special Overtone Project  (Read 48689 times)
ic-racer
Full Member
***
Offline Offline

Posts: 104



View Profile
« on: January 17, 2008, 06:17:49 AM »
I'm kind of in the same boat as all of you waiting for my overtone parts. I have ordered the boards and hardware and cabinet to use for my project.

Here is the chassis that I already have, getting some original Switchcraft components (redily available in USA).
http://img.photobucket.com/albums/v670/ic-racer/Chassis2.jpg

As you may know, Nik's version of the overtone is 50w. I am re-creating an amp with 100w output. This requires a custom powersupply (to match the original D amp). The original had 300uf capacitors, which are difficult to locate.
http://img.photobucket.com/albums/v670/ic-racer/BigCaps.jpg

Since the original used Fender transformers, these are easily available in the USA, so I have these already installed on   the chassis. http://img.photobucket.com/albums/v670/ic-racer/Transformersinplace.jpg

Unfortunatly, I must wait for my parts from Niki to do any more with the project.
« Last Edit: July 04, 2008, 07:21:56 PM by ic-racer » Logged
ic-racer
Full Member
***
Offline Offline

Posts: 104



View Profile
« Reply #1 on: January 17, 2008, 06:28:09 AM »
Here is another picture of the underside. Unlike Niki's power transformer, the original Fender transformer does not have a 6v tap for the relays and Leds. So, like the original D amp, I have added a small 6v transformer.
http://img.photobucket.com/albums/v670/ic-racer/t_6v_pt_846.jpg

If anyone is interested in specific part numbers on the transformers let me know, am glad to share the info with anyone else building an overtone.
« Last Edit: January 17, 2008, 06:34:37 AM by ic-racer » Logged
mcinku
Administrator
Hero Member
*****
Offline Offline

Gender: Male
Posts: 1084



View Profile WWW
« Reply #2 on: January 17, 2008, 07:41:07 AM »
Uhhh this is going to be cool.
I want to watch this ... subscribed

 Wink
Logged
My website

TW Express build
BM HRM build
Prinzetone build
ChrisL
Full Member
***
Offline Offline

Posts: 239


View Profile
« Reply #3 on: January 17, 2008, 02:07:03 PM »
IC-Racer,

Is that one of songwut's chassis'?
Logged
ic-racer
Full Member
***
Offline Offline

Posts: 104



View Profile
« Reply #4 on: January 17, 2008, 03:43:34 PM »
Quote from: ChrisL on January 17, 2008, 02:07:03 PM
IC-Racer,

Is that one of songwut's chassis'?

I got the chassis at a swap meet here in the states. I don't know where it originally came from, do you have a link to songwut's chassis? Maybe it matches.
Logged
ChrisL
Full Member
***
Offline Offline

Posts: 239


View Profile
« Reply #5 on: January 18, 2008, 04:13:22 AM »
Check it out here.
http://vasinguitaramp.tripod.com/id4.html

He also has some interesting Fender clone chassis kits on ebay.  I might have to pic one of those up to try out with a rehouse of my severely beat up Super Reverb chassis.  Item number is 320207423520

If that D clone chassis is the same as yours be aware that you may have grounding issues as I think he annodizes the chassis.  Depending on the type and degree of annodizing you might be ok with scaping and sanding a clear spot but most likely (to be certain) you should think about drilling and tapping and installing ground lugs.
Logged
ic-racer
Full Member
***
Offline Offline

Posts: 104



View Profile
« Reply #6 on: January 18, 2008, 03:01:59 PM »
I think the originals were anodized also. Here are some pictures of where I believe Mr D used these star washers to ensure adequate ground on the components that need to be grounded to the chassis.

* Original Jacks.jpg (64.14 KB, 644x256 - viewed 963 times.)
« Last Edit: January 18, 2008, 10:30:21 PM by ic-racer » Logged
ic-racer
Full Member
***
Offline Offline

Posts: 104



View Profile
« Reply #7 on: January 18, 2008, 03:03:33 PM »
Likewise, on my chassis I used the washers over areas that I scrapped with a Dremel. Turns out, on the original, these speaker output jacks get the ground through the chassis, where as many of the other components have a separate ground wire.

* star washer.JPG (121.11 KB, 640x480 - viewed 953 times.)
« Last Edit: January 18, 2008, 03:06:23 PM by ic-racer » Logged
ic-racer
Full Member
***
Offline Offline

Posts: 104



View Profile
« Reply #8 on: January 19, 2008, 05:36:04 AM »
Updated shot of the chassis.

* Can cap.JPG (63.71 KB, 640x480 - viewed 969 times.)
Logged
ic-racer
Full Member
***
Offline Offline

Posts: 104



View Profile
« Reply #9 on: January 19, 2008, 05:37:50 AM »
50/100 switch and LED.

* 50 100 LED.JPG (115.2 KB, 640x480 - viewed 925 times.)
Logged
JeffreyB
Jr. Member
**
Offline Offline

Posts: 59


View Profile
« Reply #10 on: January 24, 2008, 07:15:42 AM »
where did you get the control panels?
which fender trannies did you use?  Twin style?
How do they differ from what Nik uses (other than the output wattage?)

thanks for sharing with us!
Logged
ic-racer
Full Member
***
Offline Offline

Posts: 104



View Profile
« Reply #11 on: January 24, 2008, 11:42:51 PM »
Hi,

I got the chassis locally, but from the looks of it, it is available on the internet. The chassis came screen printed with all the lables.

Since I used Hammond replacement/reproduction Fender Twin transformers. They are made in USA and Canada and are reasonably priced. I got in on a "Holiday Special" and got free shipping (25LBs!) when I ordered the transformers. I chose Fender Twin transformers because thats what Mr D used in the 80s. Niki's amp is a clone of an 80s style amp.

The original output transformer only has a 4 ohm tap (just like an 80s style original amp). The chassis I have only has the single 4 ohm speaker output also, so everything fits together like the original. This output transformer is also for four 6L6 tubes.

The power transformer only has input taps for 120v and has no 6v output. This is different than Niki's transformer, but it is exactly like the original 80s amp.
Logged
ChrisL
Full Member
***
Offline Offline

Posts: 239


View Profile
« Reply #12 on: January 25, 2008, 12:59:06 AM »
Keep posting on your build progress...good fun.
Logged
ic-racer
Full Member
***
Offline Offline

Posts: 104



View Profile
« Reply #13 on: February 23, 2008, 12:00:14 AM »
Just heard my parts will be shipping Monday!!
Logged
ic-racer
Full Member
***
Offline Offline

Posts: 104



View Profile
« Reply #14 on: March 01, 2008, 11:50:46 PM »
Any day...impatiently waiting...
Logged
Pages: [1] 2 3 ... 5 Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.