|
Title: smartulator settings?? Post by: guitarman on May 29, 2010, 05:10:50 PM hello
i just are messing around with the smartulator.... is there some sort of manual of is there someone who nows the best settings ?? i still dont really now what the nobs are doing .. is it normal you have to put the drive full op to get some sound? Title: Re: smartulator settings?? Post by: ODME on May 29, 2010, 11:46:45 PM Once again a schematic would be helpful to see where everything is.
The Drive pot varies signal from the output of the tube's 1st stage to the input of the effect. The IN pot varies the signal from an effect to the tube's 2nd stage input. The Out pot varies the signal from the tube's 2nd stage output back to the amp. With nothing plugged into the c'lator's effect loop, the loop's in/out is internally jumped. Title: Re: smartulator settings?? Post by: Nairbr on May 30, 2010, 01:51:09 AM I should imagine the settings would be similar to the Klein-ulator, the manual for that is on the Ceriatone website.
But try these settings as a starter Send / Drive - about 2 o'clock Return / In - flat out Out / Recovery - about 2 o'clock (this acts as a master volume for the amp) Both bright switches - off I'm about to purchase a kit soon myself ;D Title: Re: smartulator settings?? Post by: guitarman on May 30, 2010, 04:45:22 AM thanks a lot for the respons...
when i put the in flat out its very easy to get a lot of hum.... is there a ground loop of is that the device? ??? |