Welcome, Guest. Please login or register.
Did you miss your activation email?
November 25, 2024, 10:59:54 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.



Amplified Parts
+  Ceriatone Forum
|-+  Ceriatone
| |-+  Overtone
| | |-+  Series/Parallel
« previous next »
Pages: [1] 2 Go Down Print
Author Topic: Series/Parallel  (Read 12816 times)
fixxe
Newbie
*
Offline Offline

Posts: 17


View Profile
« on: May 09, 2011, 08:45:23 PM »

Hey,
I ordered a Bluesmaster 100W from Nik and got a 2x12 cab with Celestion G12-65 now.
So my question is if I should wire it in series or parallel? Has any of you guys compared both?

thanks!  Smiley
Logged
jestaudio
Newbie
*
Offline Offline

Posts: 20


View Profile
« Reply #1 on: May 09, 2011, 09:17:32 PM »

parallel is my prefernce, i use 2 celestion leads in trace elliot cabs . boyh are 16 ohm which gives a load of 8 ohm in parallel, if you went series you would need 2x4 ohm for a 8 ohm load or 2x8 for a 16 ohm load, you would also have to insure both speakers were in phase under either senario
Logged
SoundPerf
Sr. Member
****
Offline Offline

Gender: Male
Posts: 392



View Profile
« Reply #2 on: May 09, 2011, 11:00:34 PM »

I went with 2X12 16ohm in parallel for 8ohm load.
Logged

Chris

Ceriatone HRM 50
w/self built Dumblelator
Avatar 2X12 w/WGS ET-65 & Veteran 30
TC Electronic 2290
2001 PRS McCarty
2010 PRS 513 Swamp Ash
Tacoma JK50C
Seagull S12+
fixxe
Newbie
*
Offline Offline

Posts: 17


View Profile
« Reply #3 on: May 09, 2011, 11:03:10 PM »

sorry, forgot to mention... they're 8 ohms
so I could go either way.
Logged
boldaslove6789
Sr. Member
****
Offline Offline

Gender: Male
Posts: 310


I'm never too loud, HAHAHA


View Profile WWW
« Reply #4 on: May 09, 2011, 11:22:01 PM »

IMO Using 2 x 8ohm G1265's they sound best wired up in parallel @ 4ohms..
Logged

-Greg D. Clark

Stop searching for tone, INVENT IT!

http://www.funkymunkpedals.com/
Pedals That Speak!

 http://www.youtube.com/GDClarkProject
JD0x0
Sr. Member
****
Offline Offline

Gender: Male
Posts: 298


Happy Hour Hero


View Profile
« Reply #5 on: May 10, 2011, 08:13:05 PM »

Parrallel sounds better to me. They are also more reliable. If 1 wire or speaker on the series settup goes bad you just lost all your sound. With a parrallel settup you will still get sound, you'd just need to compensate impedance at the amp, if you had lost a speaker, for example.
Logged

It's true i've lost my marbles and i can't remember where i put them.
fixxe
Newbie
*
Offline Offline

Posts: 17


View Profile
« Reply #6 on: June 02, 2011, 10:51:46 PM »

hmm, how did you wire those 12-65s in parallel? i already wired them to be in series, which was quite the hassle with their tiny hooks  Angry
so how would wire them parallel. or whats the trick of wiring 12-65s in general (considering their small hooks)Huh?  Huh?
Logged
SoundPerf
Sr. Member
****
Offline Offline

Gender: Male
Posts: 392



View Profile
« Reply #7 on: June 03, 2011, 01:36:11 AM »

hmm, how did you wire those 12-65s in parallel? i already wired them to be in series, which was quite the hassle with their tiny hooks  Angry
so how would wire them parallel. or whats the trick of wiring 12-65s in general (considering their small hooks)Huh?  Huh?
Here's a chart.
http://www.el34world.com/charts/Charts.htm

Doing them in parallel won't be any harder. What guage wire are you using?
Logged

Chris

Ceriatone HRM 50
w/self built Dumblelator
Avatar 2X12 w/WGS ET-65 & Veteran 30
TC Electronic 2290
2001 PRS McCarty
2010 PRS 513 Swamp Ash
Tacoma JK50C
Seagull S12+
plasticvonaband
Hero Member
*****
Offline Offline

Gender: Male
Posts: 747


Pickin and Grinnin since 1989


View Profile WWW
« Reply #8 on: June 03, 2011, 02:21:56 AM »

I went parallel as well. 2x16 ohm to run at 8 ohms. I use weber 1265 alnico and they sound phenomenal.
Logged

Overdrive is like peanut butter. Some like it crunchy, some like it creamy.
Bluesmaster 50 2x12 combo and some guitars.
Pickmaster
Hero Member
*****
Offline Offline

Gender: Male
Posts: 504



View Profile WWW
« Reply #9 on: June 03, 2011, 09:40:09 AM »

Parallel wiring is a best choice. Also one thing to remember, high inductive reactance (ohmage) reduces high frequency and volume, so if your speakers are dark (G12-65s for example) it is better to have them in parallel 4 Ohm.
For more open, Fendery SRV tone I use two 16 Ohm G12 Centuries in 8 Ohm cab.
Here is a sound sample http://www.guitarampcab.com/cclean.mp3

« Last Edit: June 03, 2011, 09:44:19 AM by Pickmaster » Logged

Founder and technical director of the Custom Cabinet Company – CCC
http://www.customcabcom.com
Thilo278
Jr. Member
**
Offline Offline

Gender: Male
Posts: 85



View Profile
« Reply #10 on: June 03, 2011, 10:16:44 AM »

Pickmaster, did you try a G12 Century together with a G12-65?
Would be interested if that is a good match.
Logged
Pickmaster
Hero Member
*****
Offline Offline

Gender: Male
Posts: 504



View Profile WWW
« Reply #11 on: June 03, 2011, 11:13:19 AM »

Pickmaster, did you try a G12 Century together with a G12-65?
Would be interested if that is a good match.

Yes, at the CCC we tried loads of different combinations.
The G12-65 and Century won’t work well together because of huge difference in db –
Century is 102 db and the G12-65 is 97, so you can’t hear 65 at all. Century is to loud.
Century works well with the Fane Studio 12L, Fane AXA 12 alnico, Emi Delta Lite II, Emi Wizard and other high db speakers.
« Last Edit: June 03, 2011, 01:06:07 PM by Pickmaster » Logged

Founder and technical director of the Custom Cabinet Company – CCC
http://www.customcabcom.com
Tone Control
Sr. Member
****
Offline Offline

Gender: Male
Posts: 274



View Profile
« Reply #12 on: June 03, 2011, 01:39:52 PM »

Pickmaster, did you try a G12 Century together with a G12-65?
Would be interested if that is a good match.

Yes, at the CCC we tried loads of different combinations.
The G12-65 and Century won’t work well together because of huge difference in db –
Century is 102 db and the G12-65 is 97, so you can’t hear 65 at all. Century is to loud.
Century works well with the Fane Studio 12L, Fane AXA 12 alnico, Emi Delta Lite II, Emi Wizard and other high db speakers.


Do you find the impedance variations between models (overall and across the frequency spectrum) affect this a lot too?
I find sometimes a pair will differ the opposite way to what I expected from the published sensitivity spec, presumably because of the impedances not being identical
Logged

Dr Tone Control, Strats mostly, prefer saturated clean tones, a little OD sometimes
BM50, JTM45, 36w EF86, DZ30, Expression, + non-Ceriatones (Matchless, Victoria, Wienbrock)
Just started with pedals a little after a 10 year purist spell, but usually just delay
bluesfendermanblues
Sr. Member
****
Offline Offline

Gender: Male
Posts: 452



View Profile
« Reply #13 on: June 03, 2011, 02:12:18 PM »

@Thilo278,

if you already have purchased a 12G65 and a Century you can make a L-pad for the Century in order to take it down 5 dB's: http://www.sengpielaudio.com/calculator-Lpad.htm
Logged

Respect for the big guy's work....we're at this part of the forum because of HAD's amps.
Pickmaster
Hero Member
*****
Offline Offline

Gender: Male
Posts: 504



View Profile WWW
« Reply #14 on: June 03, 2011, 04:22:12 PM »

Pickmaster, did you try a G12 Century together with a G12-65?
Would be interested if that is a good match.

Yes, at the CCC we tried loads of different combinations.
The G12-65 and Century won’t work well together because of huge difference in db –
Century is 102 db and the G12-65 is 97, so you can’t hear 65 at all. Century is to loud.
Century works well with the Fane Studio 12L, Fane AXA 12 alnico, Emi Delta Lite II, Emi Wizard and other high db speakers.

Do you find the impedance variations between models (overall and across the frequency spectrum) affect this a lot too?
I find sometimes a pair will differ the opposite way to what I expected from the published sensitivity spec, presumably because of the impedances not being identical
Hi Tone,

Yes, you are correct.
That happens mainly when you have two similar db, but different power rated speakers.  For example Fane AXA12 alnico and Celestion Gold. At the 50watt Gold will sound louder because it’s max db is calculated at the max power output, when Fane at 50 watt just starts to produce probably 95 – 97 db pressure and reaches maximum at 100 watt. So if you have 2x12 cab with those speakers (150 watt) Gold would dominate near 15 - 50 watt and AXA will be louder at 70 - 100watt.
Also bright speaker sounds louder than same db rated dark one but it is only on high frequencies and it’s just our perception on sound.

Cheers
« Last Edit: June 03, 2011, 04:26:43 PM by Pickmaster » Logged

Founder and technical director of the Custom Cabinet Company – CCC
http://www.customcabcom.com
Pages: [1] 2 Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.