Welcome, Guest. Please login or register.
Did you miss your activation email?
November 23, 2024, 12:35:14 AM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Ceriatone
| |-+  Overtone
| | |-+  Presence for brightness		 « previous next »
Pages: [1] 2 Go Down Print
Author Topic: Presence for brightness  (Read 11501 times)
Steven_nl
Sr. Member
****
Offline Offline

Gender: Male
Posts: 473



View Profile WWW
« on: November 02, 2009, 08:44:00 AM »
I made an interesting observation. I have a regular OTS ad one of Erwins D-lators.
Used a Kleinulator before that.
I always felt the amp lacked some brightness when using a fx loop like the Klein or D-lator. Using the Bright swicth makes the whole sound thinner and it's not realy usable with the OD
I have learned (with help from Erwin) that the amp brightens up a lot when you add more Presence. I wasn't to keen on using a lot of presence cause it adds attack and I like a fairly mild attack, but it does wonders for the sound. It takes away that blanket over the speaker thing.
The thing I do notice is that this doesn't seem to be a gradual effect. It start to work on about 7. (we checked the presence pot is linear)

what are you views on this?
Steven
Logged
bluesfendermanblues
Sr. Member
****
Offline Offline

Gender: Male
Posts: 452



View Profile
« Reply #1 on: November 02, 2009, 08:58:23 AM »
Quote from: Steven_nl on November 02, 2009, 08:44:00 AM
I made an interesting observation. I have a regular OTS ad one of Erwins D-lators.
Used a Kleinulator before that.
I always felt the amp lacked some brightness when using a fx loop like the Klein or D-lator. Using the Bright swicth makes the whole sound thinner and it's not realy usable with the OD
I have learned (with help from Erwin) that the amp brightens up a lot when you add more Presence. I wasn't to keen on using a lot of presence cause it adds attack and I like a fairly mild attack, but it does wonders for the sound. It takes away that blanket over the speaker thing.
The thing I do notice is that this doesn't seem to be a gradual effect. It start to work on about 7. (we checked the presence pot is linear)
what are you views on this?
Steven
My presence know starts working at around '8' - and that where I think the sweet sound is.

Some amp builders like Henry Heisthl, Red plate amps, use a 'fixed' presence,  soldering in a resistor instead of the presence pot, with an ohmage value amounting to the presence pots ohm value at '8'.

I guess Dumble's accent switch, on his 70s amps, works in a similar fashion.
Logged
Respect for the big guy's work....we're at this part of the forum because of HAD's amps.
hywelg
Hero Member
*****
Offline Offline

Posts: 896


View Profile
« Reply #2 on: November 02, 2009, 08:59:35 AM »
Steven, one of the first thing I noticed about the presence pot was that it did very little until it gets to 2 o'clock.

Something that Matt Schofield showed me when dialling in an unfamiliar amp. Take each tone control one at a time and very rapidly sweep from 0 to 10. Doing this you will find where the 'cusp' is, i.e. the point at which the rate of change of the effect is greatest. Using this knowledge you can then more easily work the interaction of the tone controls.
Logged
Steven_nl
Sr. Member
****
Offline Offline

Gender: Male
Posts: 473



View Profile WWW
« Reply #3 on: November 02, 2009, 09:09:11 AM »
Do you guuys agree that is brightens up the sound? without adding treble. Just making it less dull sounding?
« Last Edit: November 02, 2009, 09:19:21 AM by Steven_nl » Logged
hywelg
Hero Member
*****
Offline Offline

Posts: 896


View Profile
« Reply #4 on: November 02, 2009, 09:13:26 AM »
Yes it does ,but I would have liked more range from the control personally.
Logged
Steven_nl
Sr. Member
****
Offline Offline

Gender: Male
Posts: 473



View Profile WWW
« Reply #5 on: November 02, 2009, 09:18:15 AM »
me 2
Logged
erwin_ve
Guest
« Reply #6 on: November 02, 2009, 12:11:53 PM »
Making the LNFB resistor 8k instead of 4,7k does make a better finetuning range for the presence pot.

I often wondered if there's something else in all the dumbles that are documented.
Had the pleasure playing a exact #124 dumble copy a few times. Same story; you really have to crank the presence...
Logged
Steven_nl
Sr. Member
****
Offline Offline

Gender: Male
Posts: 473



View Profile WWW
« Reply #7 on: November 02, 2009, 12:18:01 PM »
Hi Erwin. was that the mod you tried on my amp?

I that is the case:
It seemed to react a bit different altogether. Hard to explain without a real a/b test
I have the feeling with the mod we tried, there wasn't a real linear effect either. The sound seemd a bit different as well.
Logged
erwin_ve
Guest
« Reply #8 on: November 02, 2009, 12:20:43 PM »
Quote from: Steven_nl on November 02, 2009, 12:18:01 PM
Hi Erwin. was that the mod you tried on my amp?

I that is the case:
It seemed to react a bit different altogether. Hard to explain without a real a/b test
I have the feeling with the mod we tried, there wasn't a real linear effect either. The sound seemd a bit different as well.


No the mod I did (and later reversed) was something else.
Logged
Steven_nl
Sr. Member
****
Offline Offline

Gender: Male
Posts: 473



View Profile WWW
« Reply #9 on: November 02, 2009, 12:23:30 PM »
ah ok
srange, if you look at RF's Dumble. His Presence is mostly around noon I think.
Logged
erwin_ve
Guest
« Reply #10 on: November 02, 2009, 12:36:03 PM »
I forgot to mention; speakers do matter a lot.
F.e. Celestion Gold is a very bright speaker. You don't have to turn your presence up like you have to do with a Celestion G12-65.
Logged
bluesfendermanblues
Sr. Member
****
Offline Offline

Gender: Male
Posts: 452



View Profile
« Reply #11 on: November 02, 2009, 01:30:17 PM »
Quote from: Steven_nl on November 02, 2009, 12:23:30 PM
ah ok
srange, if you look at RF's Dumble. His Presence is mostly around noon I think.

who knows what value his potmeter is or maybe his amp has a resistor put in series with the pot, which limit/zooms its range to the 'working' range of a standard amp. Hence, it starts at '7' (on your amp) and ends on '10'

Could be
Logged
Respect for the big guy's work....we're at this part of the forum because of HAD's amps.
Steven_nl
Sr. Member
****
Offline Offline

Gender: Male
Posts: 473



View Profile WWW
« Reply #12 on: November 02, 2009, 01:32:40 PM »
true. I need to trust my ears not my eyes.
If you realise what kind of gasses I use that might be a better option anyway LOL Cool
Logged
erwin_ve
Guest
« Reply #13 on: November 02, 2009, 01:43:59 PM »
Quote from: bluesfendermanblues on November 02, 2009, 01:30:17 PM
Quote from: Steven_nl on November 02, 2009, 12:23:30 PM
ah ok
srange, if you look at RF's Dumble. His Presence is mostly around noon I think.

who knows what value his potmeter is or maybe his amp has a resistor put in series with the pot, which limit/zooms its range to the 'working' range of a standard amp. Hence, it starts at '7' (on your amp) and ends on '10'

Could be

Adding a resistor in series with the excisting pot is getting your range further away from the sweet spot.
Decreasing the value of the presence pot or increasing the LNFB resistor would be a option to have more control in the sweet spot IMO.
« Last Edit: November 02, 2009, 01:49:38 PM by erwin_ve » Logged
bluesfendermanblues
Sr. Member
****
Offline Offline

Gender: Male
Posts: 452



View Profile
« Reply #14 on: November 02, 2009, 03:14:19 PM »
Quote from: erwin_ve on November 02, 2009, 01:43:59 PM
Quote from: bluesfendermanblues on November 02, 2009, 01:30:17 PM
Quote from: Steven_nl on November 02, 2009, 12:23:30 PM
ah ok
srange, if you look at RF's Dumble. His Presence is mostly around noon I think.
who knows what value his potmeter is or maybe his amp has a resistor put in series with the pot, which limit/zooms its range to the 'working' range of a standard amp. Hence, it starts at '7' (on your amp) and ends on '10'
Could be
Adding a resistor in series with the excisting pot is getting your range further away from the sweet spot.
Decreasing the value of the presence pot or increasing the LNFB resistor would be a option to have more control in the sweet spot IMO.

Steven don't be like that :-) you know what I mean.

OK, paralel the presence pot with a 470 ohm resistor and ad a 1,8 k resistor in series.
This will put the 8-10 on the old pot range across the whole pot range. In effect making 8='1' on the pot range  and  10='10' on the scale.
Logged
Respect for the big guy's work....we're at this part of the forum because of HAD's amps.
Pages: [1] 2 Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.