Welcome, Guest. Please login or register.
Did you miss your activation email?
November 22, 2024, 03:20:59 AM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Ceriatone
| |-+  Overtone
| | |-+  Foil shielding on the cab		 « previous next »
Pages: [1] Go Down Print
Author Topic: Foil shielding on the cab  (Read 7728 times)
hywelg
Hero Member
*****
Offline Offline

Posts: 896


View Profile
« on: February 21, 2009, 07:41:21 PM »
Every Fender I've had has had aluminium foil  glued to the cab above the amp presumably to cut interference. I did it on my OTS when I built it. Does Nik do this on the ones he builds? Any self builders left it out? Is it necessary?

Cheers

Hywel Harris
Logged
gbergl
Newbie
*
Offline Offline

Posts: 43


View Profile
« Reply #1 on: February 21, 2009, 07:49:09 PM »
I thought of doing this to both kits I assembled (OTS and DC30), but I did not and both amps are very quiet.  I think the shielding of sensitive wires and the overall grounding are sufficient.

If an amp is noisy, it is rather simple to get some spray glue and lay down some foil, making sure it connects with the chassis when the screws draw it up to the cabinet.
Logged
hywelg
Hero Member
*****
Offline Offline

Posts: 896


View Profile
« Reply #2 on: February 21, 2009, 08:03:08 PM »
Thanks for that. I've just built a DC-30 and I occurred to me that since its quiet outside of a cab then the shielding might be unnecessary. I never did find a source for nice thick foil. I used kitchen foil and it rips too easily.
Logged
JohnE
Full Member
***
Offline Offline

Gender: Male
Posts: 145



View Profile
« Reply #3 on: February 21, 2009, 08:11:45 PM »
Quote from: hywelg on February 21, 2009, 07:41:21 PM
Every Fender I've had has had aluminium foil  glued to the cab above the amp presumably to cut interference. I did it on my OTS when I built it. Does Nik do this on the ones he builds? Any self builders left it out? Is it necessary?

Cheers

Hywel Harris
Hywel,
If I remember correctly, Nik puts a piece of thin sheet metal (aluminum, I think) under the top of the cabinet. My OTS is as quiet as any amp I have been around. Foil shielding is  common on almost any decent amplifier. You really can never go wrong with shielding. Did shield your Strat? My Fralin VHs were painfully noisy until I did a major shielding job. They are now dead quiet unless I am playing under neon (fluorescent) lighting. I did the same to my tele and it also is very quiet.
Logged
JohnE
Full Member
***
Offline Offline

Gender: Male
Posts: 145



View Profile
« Reply #4 on: February 21, 2009, 08:15:04 PM »
Quote from: hywelg on February 21, 2009, 08:03:08 PM
Thanks for that. I've just built a DC-30 and I occurred to me that since its quiet outside of a cab then the shielding might be unnecessary. I never did find a source for nice thick foil. I used kitchen foil and it rips too easily.



monteallums.com or stewart macdonald (stewmac.com) have a nice variety of shielding materials
Logged
JohnE
Full Member
***
Offline Offline

Gender: Male
Posts: 145



View Profile
« Reply #5 on: February 21, 2009, 08:18:13 PM »
Quote from: JohnE on February 21, 2009, 08:15:04 PM
Quote from: hywelg on February 21, 2009, 08:03:08 PM
Thanks for that. I've just built a DC-30 and I occurred to me that since its quiet outside of a cab then the shielding might be unnecessary. I never did find a source for nice thick foil. I used kitchen foil and it rips too easily.



monteallums.com or stewart macdonald (stewmac.com) have a nice variety of shielding materials

They sturdy adhesive backed copper foil sheets and tape.
Logged
hywelg
Hero Member
*****
Offline Offline

Posts: 896


View Profile
« Reply #6 on: February 21, 2009, 10:30:14 PM »
Yes John I shielded my strat with copper. I've actually got 2 sheets on order for my next project strat, I'll try a bit and see how well it sticks to the cab. Like most of us the amp is in and out of the cab on a regular basis and now the tinfoil is ripping and needs re-doing. I used 3M spray mount but its not really up to the job, maybe a contact adhesive would be better.
Logged
JohnE
Full Member
***
Offline Offline

Gender: Male
Posts: 145



View Profile
« Reply #7 on: February 22, 2009, 01:44:48 AM »
I have used the 3M spray for foil on a pick guard. Don't think it would work very well on wood. The adhesive back copper from  stewmac is thick and stick well inside the wood cavit of a guitar, so it should work. 
Logged
dannysgrandpa
Jr. Member
**
Offline Offline

Gender: Male
Posts: 64


Life is good here! God is good...all the time!


View Profile WWW
« Reply #8 on: March 14, 2009, 05:00:10 AM »
Aluminum tape from a hardware store is really good stuff! Sticks to everything! Just make sure its in good contact with the chassis when mounted in the cab. Cheers!
Logged
Make a joyful noise...that is smooth, tight and punchy! I believe that God likes tube tone.
Certified IPC Master Trainer: 610G, 620C, J-STD-001G/Space, 7711C/7721C. Hands on soldering trainer, inspection trainer and Electrostatic Discharge instructor.
hywelg
Hero Member
*****
Offline Offline

Posts: 896


View Profile
« Reply #9 on: March 14, 2009, 05:54:41 PM »
Just doen my DC-30 with copper foil sheet. Works very well indeed.
Logged
LUSN
Newbie
*
Offline Offline

Posts: 10


View Profile
« Reply #10 on: March 14, 2009, 08:09:27 PM »
The aluminum tape works well, but you must be sure that the FRONT of it is in contact with the chassis and adjoining strips, as the back of it is not conductive.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.