|
Title: OTS Chassis Measurements for Cabinets Post by: Noaita on June 14, 2009, 09:38:38 AM Does anybody have the specs needed to give to a cabinet builder to house the OTS chassis?
Thanks! Roger Title: Re: OTS Chassis Measurements for Cabinets Post by: hywelg on June 14, 2009, 09:53:50 AM Search the forum for chassis dimensions.
Alternately, this drawing shows them. Title: Re: OTS Chassis Measurements for Cabinets Post by: Noaita on June 14, 2009, 01:12:28 PM Thanks! The only thing missing is the hole pattern for the mounting screws. Do you happen to have those, as well?
Roger Title: Re: OTS Chassis Measurements for Cabinets Post by: hywelg on June 14, 2009, 06:22:42 PM No Sorry, maybe email Nik?
Title: Re: OTS Chassis Measurements for Cabinets Post by: Noaita on June 14, 2009, 06:54:34 PM Yep. got them from Nik.
Thanks again. Roger Title: Re: OTS Chassis Measurements for Cabinets Post by: zeeman on June 14, 2009, 07:44:43 PM Could you post the hole pattern Nick sent?
Title: Re: OTS Chassis Measurements for Cabinets Post by: Noaita on June 14, 2009, 09:00:09 PM Sure. He did say to double check the measurements because the bend lines on the chassis may vary slightly. Also note that the measurements are very light and do not really appear very well until you print out the jpeg.
Title: Re: OTS Chassis Measurements for Cabinets Post by: Noaita on June 14, 2009, 09:06:39 PM Oops. There are a few numbers I added but will have to create a new jpeg for them. For now, the holes on the front and rear bends are 1.8125" from the sides and the holes in the side bends are 1.5" from the front and rear bends. The distance from front to rear bend holes is 7.1875". Also, the 18.75" measurement from left side to right side hole is actually 18.4375" from center to center (at least on my chassis. JUST BE SURE TO DOUBLE CHECK THE MEASUREMENTS AGAINST YOUR CHASSIS BEFORE HAVING A CABINET MADE.
Hope this helps. Roger Title: Re: OTS Chassis Measurements for Cabinets Post by: zeeman on June 15, 2009, 04:02:13 AM Helps a lot, thanks.
|