Welcome, Guest. Please login or register.
Did you miss your activation email?
November 01, 2024, 01:01:45 AM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.



Amplified Parts
+  Ceriatone Forum
|-+  Ceriatone
| |-+  Overtone
| | |-+  NEW OTS and CAB day soon.... need a lot of help!!!
« previous next »
Pages: 1 [2] Go Down Print
Author Topic: NEW OTS and CAB day soon.... need a lot of help!!!  (Read 15835 times)
plasticvonaband
Hero Member
*****
Offline Offline

Gender: Male
Posts: 747


Pickin and Grinnin since 1989


View Profile WWW
« Reply #15 on: January 17, 2012, 09:40:24 AM »

one idea i had was taking the low input out, since i never use it anyway, and put a pot in there for the HRM stack so i can have dialed all the way or mix it in to whatever degree i like, or just put the switch there. I just don't know if i would use it that much. It's almost too smooth with the HRM on  Wink
Logged

Overdrive is like peanut butter. Some like it crunchy, some like it creamy.
Bluesmaster 50 2x12 combo and some guitars.
citizen
Jr. Member
**
Offline Offline

Posts: 67


View Profile
« Reply #16 on: January 17, 2012, 10:01:34 AM »

Gregg

Any idea what Nik sets the HRM trimmers when he sends them out - I'm wondering if the mids on my Bluesmaster OD could be increased..I'll search the forum for this too...

Edit - yeah the search has given me plenty to ponder - I don't want to change any components but I might try increasing the mid HRM trimmer just a hair to see if that helps...
« Last Edit: January 17, 2012, 10:20:28 AM by citizen » Logged
plasticvonaband
Hero Member
*****
Offline Offline

Gender: Male
Posts: 747


Pickin and Grinnin since 1989


View Profile WWW
« Reply #17 on: January 17, 2012, 10:46:40 AM »

Gregg

Any idea what Nik sets the HRM trimmers when he sends them out - I'm wondering if the mids on my Bluesmaster OD could be increased..I'll search the forum for this too...

Edit - yeah the search has given me plenty to ponder - I don't want to change any components but I might try increasing the mid HRM trimmer just a hair to see if that helps...

OD trimmers from Ceriatone are Treble & Mids @ 10:30  Bass Barely on
Logged

Overdrive is like peanut butter. Some like it crunchy, some like it creamy.
Bluesmaster 50 2x12 combo and some guitars.
citizen
Jr. Member
**
Offline Offline

Posts: 67


View Profile
« Reply #18 on: January 19, 2012, 11:06:55 AM »

Thanks for the info on the HRM trimmers - had my amp at a mate's rehearsal room last night and still finding it difficult to get the drive side to cut through as well as the clean side - maybe I'm using too much gain? - I have the OD rear trimmer set at 10 o'clock and had the first volume on 6 (on the dial) and front drive between 4 and 6 playing the Strat...still liking the clean channel with the first volume control cranked up to 7 or 8 - I'll keep working at it Smiley
« Last Edit: January 19, 2012, 11:08:53 AM by citizen » Logged
citizen
Jr. Member
**
Offline Offline

Posts: 67


View Profile
« Reply #19 on: January 19, 2012, 12:55:05 PM »

Sorry should have said I'm using a Klein in the loop and a slightly oversized semi-open back 1x12 cab with an older EVM12L - I've had the amp for over two years so it should be well broken in by now. Everything on the amp is stock apart from the preamp tubes which I changed for nos Brimar, Tungsol and Sovtek LPS in V1,2 & 3 respectively - just finding it hard to get the OD side louder or punchier than the clean side at gig volume. Think I'll back off on the gain for next gig and see how it does...

Thanks for the tips so far  Smiley
Logged
Pages: 1 [2] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.