Welcome, Guest. Please login or register.
Did you miss your activation email?
November 25, 2024, 04:06:48 AM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Ceriatone
| |-+  Overtone
| | |-+  Need more range from Bass, Mid, Treble controls		 « previous next »
Pages: [1] Go Down Print
Author Topic: Need more range from Bass, Mid, Treble controls  (Read 4442 times)
linebackerking
Newbie
*
Offline Offline

Posts: 3


View Profile
« on: March 22, 2009, 01:30:02 AM »
I have a OTS S&M model built by Ceriatone. I am not trying to recreate a master piece, I just want a nice sounding amp that does what I need it to. My #1 challenge is that when I turn each of the Bass, Mid and Treble controls from 0>10>0>10 I don't get much effect from any of them. Most of the time the flip switches are Bright (up), Rock (up) and Mid Boost (up). At gig level I can't get any noticeable range at all. No, the PAB is not engaged. I'm not that silly. Perhaps it's value changes that move the bass frequency down more and the treble up. Maybe it needs to be more Blackface in nature. I am no expert technically and need help. Respectfully, a lecture on what "it's supposed to be" doesn't move me forward. I simply need to make this thing work for me, the way I see it. Some suggestions from technically minded people would be very helpful and greatly appreciated. Kind regards. 
Logged
JD0x0
Sr. Member
****
Offline Offline

Gender: Male
Posts: 298


Happy Hour Hero


View Profile
« Reply #1 on: March 22, 2009, 05:30:55 AM »
there isnt too much you can do about that problem. i think the easiest solution would be to get an EQ pedal which also gives you more control over what frequencys you can change
Logged
It's true i've lost my marbles and i can't remember where i put them.
blfmmm
Newbie
*
Offline Offline

Posts: 14


View Profile
« Reply #2 on: March 25, 2009, 01:54:15 AM »
I do not have the S&M model, mine is the OTS 100 watt, and I did my own mods following a combination of traditonal fender values and original dumble values.  I originally had the J. Zucker mods and that sounded like cotton in my ears.  Pure midrange.  Now it sounds real cool.  I would try, in lieu of tweeks to the tone stack or anything, turning the midboost off and the bright off.  They seem to deffeat the purpose of tone knobs on my amp.  I have no use for them.  Also, this OTS tone stack has a lot of mids that funnel their way into the highs and lows  so it really isn't "super" responsive.  Try treb. bass. and mid. at 0.  Then turn your mids up first.  Then add treble and bass and listen for the changes.  That will be the jist of the range you will be able to get and its a good way to prep your ear.  I'm sure you will find what you are looking for, though.  Good luck.
Logged
pine
Jr. Member
**
Offline Offline

Posts: 53


View Profile
« Reply #3 on: March 25, 2009, 12:18:45 PM »
Quote from: blfmmm on March 25, 2009, 01:54:15 AM
I do not have the S&M model, mine is the OTS 100 watt, and I did my own mods following a combination of traditonal fender values and original dumble values.  I originally had the J. Zucker mods and that sounded like cotton in my ears.  Pure midrange.  Now it sounds real cool.  I would try, in lieu of tweeks to the tone stack or anything, turning the midboost off and the bright off.  They seem to deffeat the purpose of tone knobs on my amp.  I have no use for them.  Also, this OTS tone stack has a lot of mids that funnel their way into the highs and lows  so it really isn't "super" responsive.  Try treb. bass. and mid. at 0.  Then turn your mids up first.  Then add treble and bass and listen for the changes.  That will be the jist of the range you will be able to get and its a good way to prep your ear.  I'm sure you will find what you are looking for, though.  Good luck.

Would you be willing to share those mods?
Logged
linebackerking
Newbie
*
Offline Offline

Posts: 3


View Profile
« Reply #4 on: March 25, 2009, 06:13:47 PM »
Quote from: blfmmm on March 25, 2009, 01:54:15 AM
I do not have the S&M model, mine is the OTS 100 watt, and I did my own mods following a combination of traditonal fender values and original dumble values.  I originally had the J. Zucker mods and that sounded like cotton in my ears.  Pure midrange.  Now it sounds real cool.  I would try, in lieu of tweeks to the tone stack or anything, turning the midboost off and the bright off.  They seem to deffeat the purpose of tone knobs on my amp.  I have no use for them.  Also, this OTS tone stack has a lot of mids that funnel their way into the highs and lows  so it really isn't "super" responsive.  Try treb. bass. and mid. at 0.  Then turn your mids up first.  Then add treble and bass and listen for the changes.  That will be the jist of the range you will be able to get and its a good way to prep your ear.  I'm sure you will find what you are looking for, though.(quote)

REPLY: Respectfully, I am not a muppet nor am I deaf. I can also flip switches and turn knobs in combinations. Your time is appreciated but I am seeking "technical info" not pen pals. If you want to share your value changes, great. Much obliged.
« Last Edit: March 25, 2009, 06:17:55 PM by linebackerking » Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.