|
Title: mounting a "Klein" in OTS cab ? Post by: Franne500 on March 15, 2009, 12:30:35 PM Hi all,
Have any one of you tried ro place the Kleinulator inside the cab to the OTS ? I think that if I make a new back plate it should be able to fit below the pre amp tubes. Any experiences on this ? Title: Re: mounting a "Klein" in OTS cab ? Post by: Franne500 on March 15, 2009, 01:06:04 PM i fits right in there - I need to take out a little bit of the small wood pieces that the backplate is fitted to - But there in enough room for it to fit in there if you place it so that the volume controls faces towards you when you look at it from the back.
Furthermore it will be easy to mount send and return jacks in the backplate so that you can eassily connect external efx. AND - I'm thinking about placing a 9V adapter below the power tubes in the cab. This should be connected to power inlet - that way when you plug in power to the amp the Kleinulator wil turn On as well..... Title: Re: mounting a "Klein" in OTS cab ? Post by: bluesfendermanblues on March 15, 2009, 05:32:36 PM Or you could feed the Klein from the 12 VDC realy supply inside the OTS
Title: Re: mounting a "Klein" in OTS cab ? Post by: Franne500 on March 15, 2009, 05:34:20 PM Or you could feed the Klein from the 12 VDC realy supply inside the OTS Really ? Can the Klein take 12VDC ? That would be great ! Title: Re: mounting a "Klein" in OTS cab ? Post by: bluesfendermanblues on March 15, 2009, 06:09:40 PM The Klein will take up to 30-50 VDC depending on which JFET is used in the circuit - so no problem wiht 12 VDC :-)
Title: Re: mounting a "Klein" in OTS cab ? Post by: Franne500 on March 16, 2009, 08:22:24 AM Great !!!!! My world just got a little bit less complicated :)
Title: Re: mounting a "Klein" in OTS cab ? Post by: Steven_nl on March 16, 2009, 09:30:45 AM here is a member who did this. With a reverb. I think a G-Sharp
If you do a search on this forum you should be a able to find it (with a picture) Title: Re: mounting a "Klein" in OTS cab ? Post by: Steven_nl on March 16, 2009, 02:41:42 PM found it here:
http://ceriatoneforum.com/index.php?topic=330.0 Title: Re: mounting a "Klein" in OTS cab ? Post by: Franne500 on March 16, 2009, 02:57:51 PM Great ! Thank you so much !
|