Welcome, Guest. Please login or register.
Did you miss your activation email?
December 27, 2024, 01:30:47 AM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.



Amplified Parts
+  Ceriatone Forum
|-+  Ceriatone
| |-+  Overtone
| | |-+  Midboost wich doesnt work with the switcher
« previous next »
Pages: [1] Go Down Print
Author Topic: Midboost wich doesnt work with the switcher  (Read 3433 times)
ciaophe
Newbie
*
Offline Offline

Posts: 1


View Profile
« on: January 24, 2011, 05:08:45 PM »

Hello everybody.

I'm the happy owner of a 50W Overtone since 2008.

Everything was running well until last concert: the mid boost of this wonderful amp did not work anymore.

More precisely: when I'm switching on the pedal switch (the green one), the mid boost don't goes on.
But when I'm switching it on the rear switch (manual vs pedal) it works.

In another way, I can't switch it on or off anymore with my pedal controller

Does anybody have an explanation?

Thanks a lot
Cisco
Logged
JD0x0
Sr. Member
****
Offline Offline

Gender: Male
Posts: 298


Happy Hour Hero


View Profile
« Reply #1 on: January 24, 2011, 07:13:20 PM »

Firstly I dont think thats the midboost. Rather the preamp boost (PAB) which bypasses the tone controls. Unless you got a custom switch with the actual mid boost (deep) on it.

Anyway make sure the switches on the back are in the correct position. IIRC some of them were wired backwards, more notably the earlier amps, wich may pertain to yours. Not a big deal the switches just work opposite as they are labeled. If thats not it, your problem points to something in the pedal not working.
Logged

It's true i've lost my marbles and i can't remember where i put them.
DboyBlues
Newbie
*
Offline Offline

Posts: 17


View Profile
« Reply #2 on: January 24, 2011, 07:47:23 PM »

"Firstly I dont think thats the midboost. Rather the preamp boost (PAB) which bypasses the tone controls. Unless you got a custom switch with the actual mid boost (deep) on it.

Anyway make sure the switches on the back are in the correct position. IIRC some of them were wired backwards, more notably the earlier amps, wich may pertain to yours. Not a big deal the switches just work opposite as they are labeled. If thats not it, your problem points to something in the pedal not working."

+1 and tell nik, he might send you another switcher??? maybe.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.