Welcome, Guest. Please login or register.
Did you miss your activation email?
November 13, 2024, 07:23:49 AM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Ceriatone
| |-+  Overtone
| | |-+  Low voltage. Help!?		 « previous next »
Pages: [1] Go Down Print
Author Topic: Low voltage. Help!?  (Read 3922 times)
guitarpkr76
Newbie
*
Offline Offline

Posts: 9


View Profile
« on: August 29, 2013, 12:15:43 AM »
Hey guys. I just finished up a Ceriatone OTS HRM with Classictone transformers. I'm trying to work out a few kinks. The main one being the overdrive volume is way low and sounds like crap. I started checking voltage s and noticed that pin 1 on V2 was way low. Here's what I'm getting on V2:

Pin 1: 90
Pin 3: 3.8
Pin 6: 224.5
Pin 8: 1.7

Can you guys point me in the right direction on what to check? I'm relatively ignorant when it comes to this. I've only built one other amp before. So explain it to me like a 5th grader. Thanks for any help!

-Brent
Logged
guitarpkr76
Newbie
*
Offline Offline

Posts: 9


View Profile
« Reply #1 on: August 29, 2013, 12:48:41 AM »
Ok, it looks like the tube I had in V2 had an issue. I swapped it out now I'm getting the voltages below. The amp still sounds horrible. Not a lot of volume on the drive channel and it sound nasty and fizzy. Any help?


V1

Pin 1: 207V
Pin 3: 2.04V
Pin 6: 210
Pin 8: 1.95V

V2

Pin 1: 214.4V
Pin 3: 2.03V
Pin 6: 217V
Pin 8: 2V

V3

Pin 1: 184V
Pin 3: 86V
Pin 6: 373V
Pin 8: 86V
Logged
hywelg
Hero Member
*****
Offline Offline

Posts: 896


View Profile
« Reply #2 on: August 29, 2013, 08:16:48 AM »
If your clean is OK then you just need to double and triple check your OD wiring right back to the relay.

Also your PI voltages are way off. Which would indicate to me your clean isn't going to be OK either. I'd sort that first.
Logged
guitarpkr76
Newbie
*
Offline Offline

Posts: 9


View Profile
« Reply #3 on: August 29, 2013, 01:01:23 PM »
Thanks! Yeah, I'm going to try to get the PI right first. I'm going to try a different tube first and then go from there. The clean isn't great, but it's much louder than the drive. If the tube doesn't fix the PI problem where is the first place i should look? Thanks again!

-Brent
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.