|
Title: lead channel problem Post by: bluerabbitjames on May 13, 2010, 04:48:07 AM hi
i have a overtone bluesmaster 50w since 2 years yesterday when i started to play i found the OD channel farty today no more sound ,i must push the level to 10 to hear something clear channel is ok i changed the v2 tube with no better results can someone help????????????????? Title: Re: lead channel problem Post by: mcinku on May 13, 2010, 06:11:05 AM Do you know how to measure your V2 voltages?
They should be around... Pin1 191V Pin3 1.8V Pin6 195V Pin8 1.7V If you're not sure how to do that... take your amp to the tech. Title: Re: lead channel problem Post by: bluerabbitjames on May 13, 2010, 09:32:06 AM hi mcincku
thanks for your quick answer nice pin1 197v pin3 1.57v pin6 202v pin8 1.45v regards Title: Re: lead channel problem Post by: bluerabbitjames on May 14, 2010, 11:30:16 AM hi all
i find that the problem came from the relay i am trying to play without the relay until i recieve a new one do you know how to do that i am only using the OD channel regards Title: Re: lead channel problem Post by: mcinku on May 14, 2010, 04:57:10 PM hi all i find that the problem came from the relay i am trying to play without the relay until i recieve a new one do you know how to do that i am only using the OD channel regards You need to rewire the relay in order to play without one... I don't thik that's worth it. Better to wait until you get a new one. Title: Re: lead channel problem Post by: bluerabbitjames on May 14, 2010, 06:17:41 PM thanks mcinku
i found the solution with nick i soldered some bridges so i can work without the relay nick is really a nice guy thanks |