Welcome, Guest. Please login or register.
Did you miss your activation email?
November 25, 2024, 03:55:10 PM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.



Amplified Parts
+  Ceriatone Forum
|-+  Ceriatone
| |-+  Overtone
| | |-+  KT-77 with HRM Bluesmaster
« previous next »
Pages: [1] Go Down Print
Author Topic: KT-77 with HRM Bluesmaster  (Read 3226 times)
mwdavis14
Newbie
*
Offline Offline

Posts: 17


View Profile
« on: November 12, 2013, 07:33:14 PM »

has anyone tried these tubes?  Highly recommended to me for the dumble Bluesmaster circuit by Brandon of Bludotone.  I have MM transformers, and have verified w/MM that the PT and OT will "easily" run them w/no issues.  In most locations, PT OT ability to handle the higher heater current is only issue flagged as concern.  I'm not a circuit designer, so hoping someone can say whether or not this tube would present any issues in the Ceriatone HRM Bluesmaster cirucuit?  I've searched through the forum and have seen no answer already noted, although a few folks seem to have tried the tubes.  Many Thanks!
Logged
plasticvonaband
Hero Member
*****
Offline Offline

Gender: Male
Posts: 747


Pickin and Grinnin since 1989


View Profile WWW
« Reply #1 on: November 30, 2013, 10:06:23 PM »

The KT-77 is a higher wattage version of the EL-34. In theory, using them would result in an EL-34 type sound, but with more headroom. I say in theory, because most of the OTS circuits get the majority of the tone from the pre amp section, and the power amp section is biased relatively cool and doesn't generally color the sound too much. There are exceptions, of course. For example, the Bluesmaster tends to get a lil more dirty/overdriven on the clean side when pushed hard due to the design of the PI allowing it to break down more, and the clean preamp has more overall signal output, particularly in the lows and low mids, and can push the output tubes a lil more.
If you don't want the typical EL-34 sound, and want to experiment with higher wattage/more headroom output tubes, I recommend the KT-88. They will sound more like a 6L6. A couple of folks here in the forum have used em with no probs, even on stock iron. Either way you go, be sure to use a bias calculator program, as both will require much higher bias current than a 6L6, EL-34, or a KT-66.

Hope this helps!
Gregg
Logged

Overdrive is like peanut butter. Some like it crunchy, some like it creamy.
Bluesmaster 50 2x12 combo and some guitars.
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.