Welcome, Guest. Please login or register.
Did you miss your activation email?
May 18, 2024, 03:53:09 AM
Home Help Search Login Register
News: Ceriatone Forums are up and running!!!
 
Guests please register
Note: If you want to help you can donate to keep the forums alive.



Do you want to advertise on this forum ? Send me a private message.

Amplified Parts
+  Ceriatone Forum
|-+  Ceriatone
| |-+  Overtone
| | |-+  Tips for adding the teflon wire to the shield on the tone stack?		 « previous next »
Pages: [1] Go Down Print
Author Topic: Tips for adding the teflon wire to the shield on the tone stack?  (Read 3583 times)
cyndicate
Newbie
*
Offline Offline

Posts: 33


View Profile
« on: June 01, 2010, 06:19:31 AM »
How do you guys add the teflon wire to the shielded wire? Any tips on doing so? Do you guys just unbraid the shield, then twist it and solder the teflon wire to it? Just making sure I'm doing it right.

As pictured here.
Logged
hywelg
Hero Member
*****
Offline Offline

Posts: 896


View Profile
« Reply #1 on: June 01, 2010, 08:11:41 AM »
Looks fine to me. All I do different is I use, in addition, a smaller heat shrink to cover the soldered joint aswell.
Logged
erwin_ve
Full Member
***
Offline Offline

Gender: Male
Posts: 158



View Profile
« Reply #2 on: June 01, 2010, 08:27:55 AM »
When using a wire stripper for the braided shield; only do the cut and move it up so there is a small part uncovered. That's were the teflon wire is soldered. Then put a small piece of heatshrink to cover it.
Added is a picture without the heatshrink added.

* cable_guy.jpg (47.44 KB, 600x648 - viewed 580 times.)
Logged
cyndicate
Newbie
*
Offline Offline

Posts: 33


View Profile
« Reply #3 on: June 01, 2010, 04:20:50 PM »
Quote from: erwin_ve on June 01, 2010, 08:27:55 AM
When using a wire stripper for the braided shield; only do the cut and move it up so there is a small part uncovered. That's were the teflon wire is soldered. Then put a small piece of heatshrink to cover it.
Added is a picture without the heatshrink added.

Thanks for the picture! That definitely helps, I've been doing it a way that took forever. This is definitely cleaner and easier to assemble.
Logged
cyndicate
Newbie
*
Offline Offline

Posts: 33


View Profile
« Reply #4 on: June 01, 2010, 04:21:24 PM »
Quote from: hywelg on June 01, 2010, 08:11:41 AM
Looks fine to me. All I do different is I use, in addition, a smaller heat shrink to cover the soldered joint aswell.

Sorry should have stated that the picture was from the Ceriatone sight of a completed Overtone. Was just finding the picture as a example.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!

CeriaTone Forum is not afiliated with Ceriatone Amplifications. The CeriaTone and name, logo and related trademarks and service marks, owned by CeriaTone. , are registered and/or used in the U.S. and many foreign countries. All other trademarks, service marks, and trade names referenced in this site are the property of their respective owners.