|
Title: Kleinulator 9v plug Post by: Steven_nl on July 01, 2008, 06:35:55 PM Hi
a small thing but I have the feeling the 9V connector of the Kleinulatir isn't standard Boss size. Is that right? I need to find a different plug/connector. 2.5 mm? Reverse polarity? Cheers Steven Title: Re: Kleinulator 9v plug Post by: poipounder57 on July 02, 2008, 12:58:48 AM Hi Steve...I emailed Nik awhile back. I wanted to know if the Boss adaptor would work with the Kleinulator. His reply "As for the Klein, the Boss style would work."
Title: Re: Kleinulator 9v plug Post by: casken on July 05, 2008, 05:16:29 PM Steven, what connector did you end up using that fit it properly and had the correct polarity?
Thanks Title: Re: Kleinulator 9v plug Post by: Steven_nl on July 06, 2008, 05:14:05 AM I bought a 2,5 mm plug and a 2.1mm female plug and asked a friend to solder it. (Terrible that I can't do a simple solder job like that myself).
(I wish the Kleinulator was 19 inch) Title: Re: Kleinulator 9v plug Post by: poipounder57 on July 06, 2008, 05:52:00 AM So...a Boss style adaptor doesn't work? Is the center pin neg. or pos.?
Title: Re: Kleinulator 9v plug Post by: Steven_nl on July 06, 2008, 06:25:19 AM with mine it didn't
centre is standard (negative) Title: Re: Kleinulator 9v plug Post by: Nathan on July 06, 2008, 09:22:51 AM So...a Boss style adaptor doesn't work? Is the center pin neg. or pos.? No standart boss doesn't work. Standart boss is 2.1mm and I think Nik's ones are 2.5mm. Title: Re: Kleinulator 9v plug Post by: casken on July 07, 2008, 03:13:18 AM Anybody have a link to ordering a 9v supply that fits the Klein?
Title: Re: Kleinulator 9v plug Post by: Steven_nl on July 07, 2008, 06:21:11 AM No electronics shop around?
I asled a friend to solder a short extension cable with a female 2.1mm plug and a male 2.5mm plug. Title: Re: Kleinulator 9v plug Post by: Nathan on July 07, 2008, 10:22:57 AM No electronics shop around? I asled a friend to solder a short extension cable with a female 2.1mm plug and a male 2.5mm plug. No electronic shop around, I have to take a car and drive for about 45mins to find an electronic shop.... Title: Re: Kleinulator 9v plug Post by: archelo on July 07, 2008, 02:06:13 PM Anybody have a link to ordering a 9v supply that fits the Klein? All you need is a 2.5 mm plug. Cut the 2.1 off of the Boss adapter and solder the 2.5 on. You should be in business. Title: Re: Kleinulator 9v plug Post by: Nathan on July 07, 2008, 03:13:52 PM Anybody have a link to ordering a 9v supply that fits the Klein? All you need is a 2.5 mm plug. Cut the 2.1 off of the Boss adapter and solder the 2.5 on. You should be in business. I suggest the opposite, change the Kleinulator's plug Title: Re: Kleinulator 9v plug Post by: Nathan on July 08, 2008, 12:58:43 PM Nik send me the Klein's layout. I solder the wire all looked OK.
When I put on the klein, the little chip has been blow ! ??? ??? ??? ??? ??? ??? ??? ??? Title: Re: Kleinulator 9v plug Post by: archelo on July 08, 2008, 08:06:11 PM Anybody have a link to ordering a 9v supply that fits the Klein? All you need is a 2.5 mm plug. Cut the 2.1 off of the Boss adapter and solder the 2.5 on. You should be in business. I suggest the opposite, change the Kleinulator's plug +1 Yes sir...this is a better option so you dont have to modify the adapter and the 2.1 plugs are more common. Title: Re: Kleinulator 9v plug Post by: archelo on July 09, 2008, 07:21:27 PM UPDATE...Nik responded to my email and confirmed that he is changing the plugs to 2.1mm and they are negative center.
Title: Re: Kleinulator 9v plug Post by: Nathan on July 10, 2008, 10:03:18 AM UPDATE...Nik responded to my email and confirmed that he is changing the plugs to 2.1mm and they are negative center. I have to contact Nik for a 1044S chip, mine has blow, and there is no electronic shop which can have it for me .... >:( >:( |